More from this brand
Technical data
| Attributes | |
| ARTICLE | GC1100-080EV |
| POWER | POWER : 10,4 kW HEATING PLATES : 4 x 2,6 kW |
| SIZE L/W/H | 800 x 730 x 250 mm |
| VOLTAGE | 400/50 V/Hz |
The top is pressed. The possibility of liquids getting into the appliance’s body has been minimized as well as the potential failures. The edges on the top plate are rounded which also makes easier to keep the appliance clean and saves the time of the personnel responsible for maintaining hygiene in the kitchen.
A pressed stainless-steel cooking top that creates a seamless work surface, eliminating gaps where food debris can collect. The smooth top is raised above the heating elements so spills stay on the surface and are wiped away without reaching the internal parts.
Each of the four round heating plates is driven by its own 2.6 kW element. The elements sit directly beneath the steel top and transfer heat by conduction, so the plate reaches cooking temperature quickly and maintains an even heat across its 220 mm diameter. A six-position knob for each plate lets the chef set the exact level needed for simmering, boiling or holding.
To start, the operator places pans on the chosen plates, turns the corresponding knobs to the desired heat level, and waits for the indicator lights to confirm the plates are ready. Once cooking is complete, the knobs are returned to the off position and the pans are removed. The pressed top remains hot for a short time after the elements are switched off, so caution is needed until it cools.
The top is constructed from high-quality stainless steel, including the removable chimney that sits at the rear. The chimney can be detached and washed in a commercial dishwasher, preventing grease build-up. Ergonomic knobs are positioned along the front edge for easy reach, and the hair-joint connection system allows multiple GORT LINE 700 units to be joined side by side without visible gaps.
The 10.4 kW total power rating requires a 400 V three-phase supply, which is standard in professional kitchens for high-demand appliances. The 800 mm width and 730 mm depth fit within a typical worktop run, while the 250 mm height leaves clearance beneath for storage or under-counter equipment. The pressed top's smooth finish and removable chimney simplify daily cleaning, and the stainless-steel body resists corrosion in a busy kitchen environment.
This model is part of the GORT LINE 700 series and is designed to integrate with other units in the same range.