BHS.LV Beer Set for Professional Worktops

A beer set organises the flow of draught beer from keg to tap without cluttering the bar. The worktop provides a stable surface for glasses, while the drip tray beneath the taps catches spills and condensation. This keeps the bar area clean and reduces the risk of slips. The taps themselves are mounted on a rail or tower, allowing the operator to pull pints directly over the drip tray, so any overflow is contained rather than running onto the floor or counter.

The set is installed as a single unit along the back edge of the bar. The worktop is placed at standard bar height, giving staff a comfortable working level. The drip tray sits just below the taps, angled slightly to guide liquid into a waste outlet or removable container. The taps connect to the beer lines at the rear, keeping the lines out of sight and protected from accidental damage. Once in place, the set requires no further adjustment during service; the operator simply opens the tap and pulls the pint.

Construction is in stainless steel throughout, chosen for its resistance to corrosion from beer and cleaning chemicals. The worktop is a single sheet, seamless where possible, to prevent dirt or liquid collecting in joints. The drip tray is also stainless steel, with a perforated or slatted surface to allow liquid to drain while supporting glasses. The unit is delivered fully assembled, so installation is a matter of positioning it on the bar and connecting the beer lines.

The controls are the taps themselves, which open and close the flow of beer. Each tap is operated by a simple lever, giving the operator precise control over the pour. The taps are spaced evenly along the rail, allowing multiple beers to be served from the same unit without crowding.

The 2200 mm length provides space for multiple taps, making it suitable for bars offering a selection of beers. The 500 mm depth gives enough room for glasses and temporary storage without encroaching on the bar's working area. The 40 kg weight ensures the unit remains stable during use, while still being light enough for two people to move it into position. The 740 mm height matches standard bar worktops, so the set integrates seamlessly with existing counters.

Cleaning is straightforward: the taps are removed and cleaned separately, while the worktop and drip tray are wiped down with a sanitising solution. The stainless steel surfaces can be scrubbed without risk of damage, and the seamless construction prevents dirt from becoming trapped. The drip tray is either fixed with a drain connection or removable for emptying, depending on the bar's plumbing setup.

The set is supplied as a single unit, with no variants or additional components listed. It is designed for professional bars and pubs, where durability and ease of cleaning are essential.