BRAVILOR BONOMAT Fixing Bolts for Professional Coffee Equipment

Fixing bolts hold the working parts of professional coffee equipment firmly in place. A bolt passes through the mounting hole in the appliance chassis, threads into a tapped hole in the frame or cupboard, and is tightened with a spanner. The head of the bolt presses against a washer or directly against the appliance, spreading the load so the metal does not deform. Once secured, the appliance stays level and vibration is reduced, protecting internal components and keeping water and electrical connections aligned.

To use the bolts, first position the appliance on the worktop or shelf where it will be installed. Mark the mounting holes through the appliance feet or brackets. Drill pilot holes at the marked points, then tap them to the correct thread size. Insert the bolts through the appliance feet and thread them into the tapped holes. Tighten evenly in a diagonal pattern to prevent warping the chassis. Check that the appliance is stable and level before powering it on.

These bolts are manufactured to match the thread pitch and diameter specified by BRAVILOR BONOMAT for their coffee brewers, grinders and water boilers. Using the correct fixing hardware ensures the appliance remains securely mounted during daily operation and cleaning.

The bolts fit BRAVILOR BONOMAT models that require mechanical fastening to a work surface or frame. Always consult the appliance manual to confirm the exact bolt specification before installation.