Casselin CRLCT Milk Cooler and Cup Warmer for Professional Use

A milk cooler and cup warmer in one unit keeps fresh milk chilled while warming cups to the temperature that releases aroma and texture in espresso-based drinks. The cooler circulates refrigerant through an evaporator coil beneath the milk vat, drawing heat out of the liquid and holding it between 2 °C and 8 °C. Above the cooler, a low-wattage heating plate warms cups to 60 °C, preventing thermal shock when hot espresso is poured and preserving the crema.

The operator fills the 15 L stainless-steel vat with fresh milk, sets the digital thermostat to the desired temperature, and places cups on the warming plate. LED lighting inside the cooler illuminates the vat, making it easy to check fill levels and cleanliness during service. The unit runs on a standard 230 V circuit, drawing 0.3 kW to maintain both cooling and warming cycles simultaneously.

Construction is stainless steel throughout, with a single glazed tempered-glass front that allows staff to monitor the milk without opening the door. The refrigerant is R600 A, a hydrocarbon chosen for its low environmental impact and efficient heat transfer. Digital controls on the front panel adjust the milk temperature between 2 °C and 8 °C; the cup warmer is fixed at 60 °C and requires no separate setting.

A 15 L capacity suits medium-volume coffee stations, holding enough milk for a morning service without frequent refills. The 300 mm depth fits neatly beneath a typical worktop or counter, while the 525 mm width leaves space for espresso machines and grinders alongside. At 35 kg, the unit is stable on the floor but light enough to move with a trolley when the kitchen layout changes.

Cleaning follows from the materials: the stainless-steel vat and interior surfaces wipe down with a damp cloth and mild detergent after each service. The tempered-glass front is cleaned with glass cleaner to maintain visibility. The evaporator coil and heating plate require periodic inspection to ensure no milk residue or dust has accumulated, which could reduce efficiency.

The CRLCT is a single model with no variants; it is listed in the catalogue under refrigeration and beverage equipment.