Casselin CVBRE2 Cold Display Case for Worktop Use

A cold display case keeps chilled food visible and safe on the worktop without connecting to a refrigeration circuit. Instead of a compressor, the CVBRE2 uses eutectic plates—steel panels pre-charged with a phase-change solution. The plates are frozen overnight in a freezer, then placed inside the case. As the solution melts, it absorbs heat from the interior, maintaining a low temperature for several hours. This method eliminates noise, vibration and the need for a power point at the display location, making it practical for counters, buffets or outdoor service.

To use the case, freeze the eutectic plates in a freezer until solid. Place the plates into their designated slots inside the case. Load the porcelain serving plates with chilled food, arranging them on the work surface. Slide the removable tempered glass cover over the top to create an enclosed, chilled environment. The stainless steel drip tray beneath the plates collects any condensation, preventing spills on the worktop. When the plates have thawed, remove them and refreeze for the next service period.

The case is built from black epoxy-painted steel for a durable, easy-to-clean finish. Two eutectic plates, each 250 x 250 mm, provide the cooling capacity, while two porcelain plates, 300 x 300 mm, serve as the display surface. A removable tempered glass cover protects the food and retains the cold air. The stainless steel drip tray is positioned beneath the plates to catch condensation.

Controls are minimal: the eutectic plates are frozen externally, and the case itself has no thermostat or power switch. The temperature inside depends on the number of plates used and the ambient conditions, making it suitable for short-term display rather than long-term storage.

The footprint of 680 x 460 mm fits on most worktops, while the 395 mm height allows clear visibility of the food from the front. The 27 kg weight means the case can be moved by one person but is stable enough to stay in place during service. The tempered glass cover slides off for loading and unloading, and the porcelain plates lift out for cleaning.

Cleaning involves wiping the interior and exterior surfaces with a damp cloth. The porcelain plates and stainless steel drip tray are removable and can be washed separately. The eutectic plates should be dried after thawing to prevent corrosion. The tempered glass cover can be cleaned with standard glass cleaner when removed from the case.

The CVBRE2 is a single model with no variants. It is categorised under counter-top refrigeration and chilled display equipment.