More from this brand
Technical data
| Attributes | |
| ARTICLE | CDLPF4 |
| SIZE L/W/H | 190 / 320 / 420 mm |
| WEIGHT | 6 kg |
| CAPACITY | 4 liters |
Dimensions: 190 x 320 x 420 mm
A porcelain cold milk dispenser keeps milk chilled without electricity by using an ice-filled container to draw heat away from the pot. The stainless steel ice reservoir sits directly beneath the porcelain vessel, transferring cold through conduction. As the ice melts, it absorbs warmth from the milk, maintaining a consistently cool temperature suitable for serving throughout service periods.
To prepare the dispenser, the operator fills the stainless steel ice container with fresh ice cubes, then pours chilled milk into the porcelain pot. The metal chain sign, attached to the porcelain lid, hangs visibly to identify the contents. Milk is dispensed by lifting the lid and pouring directly from the pot, with the ice reservoir continuing to cool the remaining milk until the ice is fully melted.
The dispenser is constructed from glazed porcelain for the milk pot and lid, with a stainless steel ice cube container housed inside the base. A porcelain sign on a metal chain provides clear labelling. The unit measures 190 mm deep, 320 mm wide and 420 mm high, fitting neatly on a worktop or counter. At 6 kg, it remains light enough to move between storage and service areas without requiring fixed installation.
The 4 litre capacity allows the dispenser to hold enough milk for multiple servings, reducing the need for frequent refills during peak service. The compact footprint of 320 mm width and 190 mm depth maximises counter space in professional kitchens and cafés. The glazed porcelain surface resists staining and is simple to clean after use, while the stainless steel ice container can be removed for thorough washing and sanitising.
Cleaning involves emptying any remaining milk and ice, then washing the porcelain pot, lid and sign with warm soapy water. The stainless steel ice container should be cleaned separately to prevent cross-contamination and dried thoroughly before reassembly. Regular descaling of the porcelain is not required, but the surface should be wiped down after each use to maintain hygiene standards.