Casselin pump dispenser for GN 1/6 containers CPSN1

A pump dispenser meters liquid from a standard GN 1/6 gastronorm container without lifting or pouring. The container sits inside the dispenser's stainless-steel housing; a spring-loaded pump tube draws the liquid up and dispenses a fixed volume each time the lever is pressed. This method keeps the container sealed, prevents spills and delivers consistent portions for sauces, dressings or condiments. To use, slide the GN 1/6 container into the housing until it locks in place. The pump tube automatically locates at the bottom of the container. Pressing the lever once releases 23 mL; repeated presses dispense the same volume each time. The container remains in position until empty, so refills are quick and the worktop stays clean. The unit is built from stainless steel throughout, including the housing, lever and pump mechanism. A GN 1/6 container of 200 mm depth fits inside, giving a total liquid capacity of 2.8 L. The footprint of 166 mm by 285 mm allows it to stand on a standard worktop or shelf, while the 330 mm height keeps the lever within easy reach. At 2.6 kg the dispenser is light enough to move between stations or store in a cupboard when not in use. Cleaning follows from the construction: remove the container, rinse the pump tube under a tap, and wipe the stainless-steel surfaces with a damp cloth. The stainless-steel housing slides off in one motion, letting you rinse the pump mechanism under the tap without tools. The dispenser is sized for GN 1/6 containers only.