More from this brand
Technical data
| Attributes | |
| ARTICLE | 19089472 |
| POWER | 0.733 kW (cooling power) |
| SIZE L/W/H | 1693 / 826 / 2008 mm |
| VOLTAGE | 220-240V~1N;50Hz |
| Temperature | 0 / + 8°C; -18/ -22°C |
| VOLUME | 596 L |
| WEIGHT | 152 kg |
| Model | CUD-12G/N |
| SHELVES | 3 removable GN 2/1 epoxy-coated shelves |
| Number_of_doors | 2 |
| Refrigerant | refrigerant R290; 60Hz version (0.779kW; R290) + 60 € (Art. 19089473) |
| NOTES | Off-cycle defrost/ Electric defrost |
Professional dual-temperature refrigeration unit made of AISI 304 stainless steel with forced-air circulation. The unit is divided into two independent compartments: a refrigerator with a temperature range of 0…+8 °C and a freezer with a temperature range of -18…-22 °C. Both compartments are equipped with independent refrigeration systems and electronic controls. The refrigerator compartment is defrosted by stopping the compressor, while the freezer compartment uses an electric defrost system.
A professional refrigerator and freezer combined in one unit, designed to hold both chilled and frozen goods at stable temperatures. The refrigerator compartment cools by circulating cold air with a fan, removing heat from food and maintaining a consistent temperature throughout. The freezer uses the same principle but at much lower temperatures, locking in freshness and preventing ice crystals from forming. Off-cycle defrost in the refrigerator stops the compressor periodically, allowing frost to melt naturally without additional heat. The freezer uses an electric defrost system, which briefly warms the evaporator to clear ice build-up, ensuring uninterrupted cooling performance.
The operator loads food onto the three removable GN 2/1 shelves in the refrigerator section, adjusting shelf height to fit different container sizes. The freezer section is accessed separately, allowing independent temperature control for each zone. The electronic control panel sets the desired temperature for both compartments, with LED lighting illuminating the interior for clear visibility. The unit maintains the set temperatures automatically, adjusting cooling cycles as needed to compensate for door openings and ambient conditions.
The cabinet is constructed from stainless steel inside and out, providing a durable, hygienic surface that resists corrosion and is easy to clean. Three epoxy-coated shelves support GN 2/1 gastronorm trays, each rated for loads up to 40 kg. The 50 mm thick insulation reduces cold loss, helping to maintain stable temperatures in both compartments. Adjustable legs allow the unit to be levelled on uneven floors, with a height range of 130 to 200 mm.
The 596 litre capacity provides ample storage for bulk ingredients, while the two-door configuration minimises cold air loss when accessing either compartment. The 0 to +8 °C temperature range in the refrigerator suits fresh produce, dairy and prepared dishes, while the -18 to -22 °C freezer range preserves frozen goods for extended periods. The 0.733 kW cooling power reflects the load the unit places on the electrical supply, requiring a dedicated circuit in a professional kitchen. The 152 kg weight indicates the unit must be positioned before delivery, as it cannot be moved easily once in place. The 1693 x 826 x 2008 mm footprint determines the floor space required, including clearance for ventilation and door swing.
Cleaning involves removing the shelves and wiping down the stainless steel interior and exterior with a damp cloth and mild detergent. The epoxy-coated shelves can be washed separately, while the adjustable legs should be checked periodically to ensure the unit remains level. The refrigerant R290 is a hydrocarbon with low environmental impact, used in the 50 Hz version of this model. A 60 Hz variant is also available, with a slightly higher cooling power of 0.779 kW.