FAGOR Wall-Mounted Wine Refrigerator for Professional Storage, 1697x2600 mm

A wine refrigerator built for wall mounting keeps bottles at precise serving temperatures while displaying them through argon-filled double glazing. The unit circulates chilled air continuously across every shelf, eliminating hot spots that could age wine unevenly. An electric defrost system melts ice automatically and evaporates the water, so no manual draining is needed.

The cabinet arrives in two sections: the main body and a removable upper module that houses the entire refrigeration circuit. Once assembled against the wall, the black stainless-steel exterior and interior resist corrosion in busy commercial settings. Shelves and bottle hooks must be ordered separately and are supplied disassembled, allowing the operator to configure the interior for different bottle sizes and presentation styles.

Inside, horizontal LED strips run along the perimeter, lighting each bottle evenly without casting shadows. A digital control panel on the front sets a single temperature zone between +4 °C and +18 °C, covering both long-term storage and ready-to-serve conditions. The 50 Hz compressor uses R290 refrigerant, which circulates through forced-air coils to maintain steady cooling even when ambient temperatures reach +40 °C and relative humidity is 40%.

The 1484 litre capacity spreads across a footprint of 1697 mm wide by 632 mm deep, rising 2600 mm from floor to top. At 548 kg, the unit requires a sturdy wall and a dedicated 220-240 V circuit capable of supplying 2.58 kW. A 60 Hz version with the same refrigerant is available as a separate article.

Cleaning is simplified by the smooth stainless-steel surfaces and the self-evaporating defrost system. Shelves can be removed for washing, while the LED lighting and heated door frame prevent condensation that would otherwise require frequent wiping.