FIMAR Vegetable Cutter 2500 for Professional Kitchens

A vegetable cutter drives a rotating blade or disc against food held in a hopper, forcing it through shaped openings at high speed. The method slices, dices, juliennes or grates in seconds, replacing hand knives and saving labour. Because the blade turns continuously, the cut is consistent and the throughput is far higher than manual work. The same principle handles hard root vegetables, soft fruits, nuts and even soft cheeses, so long as the disc or blade matches the task. To operate the FIMAR Vegetable Cutter 2500, the operator lifts the double cover, places the prepared food into the plastic hopper, and closes the cover. A safety switch on the handle must be engaged before the motor will start. Once running, the blade spins at 255 rpm, drawing the food down and forcing it through the cutting profile. The operator watches the output and stops the motor when the batch is complete, then removes the chopped or grated product from the collection tray. The unit is built on a steel frame coated with polyurethane paint that resists knocks and scratches. A special opening in the hopper accepts food from standard food-grade plastic containers, reducing spills. The cutter is supplied without discs, so operators select and fit the disc that matches the desired cut and the food being processed. The 0.37 kW motor runs on a 230 V single-phase supply, the standard circuit in most professional kitchens. The 22 kg weight keeps the cutter stable on the worktop during operation. The footprint of 220 mm depth, 610 mm width and 520 mm height fits under standard overhead cupboards and leaves room for the operator to load and unload. The polyurethane-coated housing wipes clean with a damp cloth while the removable hopper and pusher lift out for thorough rinsing under the tap. The polyurethane-coated case wipes clean with a damp cloth. The plastic hopper and any fitted discs are removed and washed separately in warm water with detergent, then dried before reassembly. The safety switch and motor housing should not be immersed; a damp cloth removes surface dirt. The FIMAR Vegetable Cutter 2500 is offered in a single-phase version only, without discs included.