FORCAR G-GN4100TN 2230 mm Refrigerator Table with GN1/1 Grids

A refrigerated worktop that keeps ingredients chilled while providing a full-length preparation surface for professional kitchens. The FORCAR G-GN4100TN table refrigerator circulates cold air through a ventilated system, ensuring even cooling without direct contact between the airflow and stored items. This method prevents dehydration and temperature fluctuations, maintaining consistent conditions across all shelves and drawers. Cold air is generated by an evaporator and distributed by a fan, creating a circular flow that envelops the interior. The refrigeration unit is housed in an extractable module beneath the worktop, allowing maintenance without dismantling the entire appliance. An electronic thermostat regulates the temperature between -2 °C and +8 °C, covering storage needs for fresh produce, dairy, and prepared dishes. Automatic defrosting cycles remove ice build-up from the evaporator, while a heating element around the door frame prevents condensation, eliminating manual wiping and reducing moisture ingress. The unit operates on a 220-240 V, 50 Hz supply, drawing 260 W to maintain set temperatures even in ambient conditions up to +32 °C. Condensation water is evaporated automatically, removing the need for external drainage. The cooling gas used is R290, a hydrocarbon refrigerant with low environmental impact. The sequence of use begins with loading ingredients onto the three supplied GN1/1 grids or into the removable drawer units. The door, fitted with a self-closing spring, seals automatically after each opening. Temperature is set via the digital control panel, and the interior remains visible through the glass door without opening. When maintenance is required, the door gasket can be removed without tools, and the entire door can be interchanged with compatible drawer units from the same range. Construction is stainless steel AISI 304 throughout, including the worktop, interior, and exterior panels. The back panel is also stainless steel, providing durability in high-traffic kitchen environments. The bottom features rounded corners for easier cleaning, and height-adjustable feet allow levelling on uneven floors. The evaporator is treated for corrosion resistance, extending the lifespan of the refrigeration system. The external dimensions of 2230 x 700 x 860 mm provide a substantial work surface, while the internal capacity of 553 litres accommodates bulk storage. The 60 mm insulation thickness reduces thermal transfer, improving energy efficiency. The unit weighs 153 kg net, requiring two-person handling for installation and repositioning. The seamless stainless steel interior and rounded corners let you slide out every GN pan without snagging a sponge or leaving residue behind. The removable door gasket and telescopic slides simplify deep cleaning, and the automatic defrosting system minimises manual ice removal. The supplied grids and slides are dishwasher-safe, allowing thorough sanitation. The G-GN4100TN is part of the FORCAR G-GN range, designed for compatibility with two- and three-drawer units. The catalogue positions this model as a refrigerated counter for professional kitchens, combining storage and worktop functionality in a single unit.