FORCAR Luggage Trolley PV2003I for Professional Use

A luggage trolley built to move heavy cases and bulk loads through tight corridors and service lifts. The PV2003I uses a stainless steel frame that carries the weight without bending, while large 250 mm wheels roll smoothly over thresholds and carpet edges. The base folds flat when not in use, cutting the footprint in half so the trolley can be stored in a cupboard or against a wall.

The trolley's operating principle is simple: the frame transfers the load from the shelves to the wheels, and the wheels distribute the weight across the floor. This keeps the operator's effort low even when the trolley is fully loaded. The red carpet-covered wooden shelves provide a non-slip surface that protects luggage from scratches and stops items sliding during transit.

To use the PV2003I, unfold the base until the support feet lock into place. Load cases or boxes onto the shelves, ensuring the weight is balanced between the two sides. Push or pull the trolley to the destination, using the handle formed by the top of the frame. When the trolley is empty, fold the base flat and stand it vertically to save space.

Construction is stainless steel for the frame, with wooden shelves covered in red carpet. Two fixed wheels at the rear and two swivel wheels at the front allow tight turns in narrow corridors. The overall dimensions of 560 mm wide, 700 mm deep and 1200 mm high fit through standard service doors and lifts.

The foldable base is the main control feature, allowing the trolley to be collapsed or set up in seconds. No additional settings or adjustments are required.

The 560 mm width means the trolley can pass through narrow doorways without tilting, while the 1200 mm height provides enough clearance for most luggage without making the unit top-heavy. The 700 mm depth gives a stable footprint that prevents tipping when loaded. The 250 mm wheel diameter ensures smooth movement over small obstacles like carpet edges or lift thresholds.

Cleaning is straightforward: wipe the stainless steel frame with a damp cloth to remove dust or marks. The red carpet on the shelves can be brushed or vacuumed to keep it free of debris. Avoid soaking the wooden shelves to prevent warping.

The PV2003I is supplied as a single unit with no variants or additional parts. It is categorised under luggage handling equipment in the FORCAR professional range.