More from this brand
Technical data
| Attributes | |
| ARTICLE | 40202794 |
| POWER | 0.485kW (4.9 kWh/24h) |
| SIZE L/W/H | 900/ 690 / 810 |
| VOLTAGE | 1x230V ~ 50Hz |
| Temperature | -15/-20°C |
| WEIGHT | 86kg |
| Model | TGB7D/090S |
| Included in the price | Included: GN 1/1 shelf each door |
| CAPACITY | 90L |
| Refrigerant | R290 |
| NOTES | Energy efficiency class D |
This freezer table combines outstanding design with professional functionality — an ideal solution for any modern professional kitchen.
1 door
Plug-in system
A freezer table that stores food at -15 to -20 °C while fitting neatly under existing counters.
A refrigeration cycle circulates R290 refrigerant through an evaporator coil inside the cabinet. A fan draws air across the coil, pulling heat out of the food and lowering the temperature to the set point. The cooled air is then distributed evenly throughout the interior, preventing warm spots and keeping every GN 1/1 container at the same safe temperature. Because the coil stays frost-free with automatic defrost, the fan never has to work against ice build-up, and the unit can run without a drain line.
Load the GN 1/1 containers onto the included wire shelves behind each door. Set the desired temperature on the 2.8″ touch panel; the display confirms the setting. The compressor starts, the fan circulates cold air, and the temperature falls to the target. An automatic defrost cycle runs at intervals, melting any frost on the coil and evaporating the condensate. When the door is opened, the fan stops to keep cold air inside, and the interior light comes on. After closing the door, the fan restarts and the cycle resumes.
The cabinet is built from stainless steel, inside and out, with a 50 mm insulation layer between the inner and outer walls. The doors are hinged on the right, with the option to reverse them to the left. A technical compartment on one side houses the compressor, condenser and controls; it can be positioned on either the right or left to suit the kitchen layout. The top of the unit is finished with a 10/10 stainless-steel surface, ready for plinth installation.
The touch control panel allows precise temperature adjustment between -15 and -20 °C. A digital display shows the current temperature and the status of the automatic defrost cycle.
A 90 L capacity holds multiple GN 1/1 containers, keeping ingredients organised and accessible. The 0.485 kW power rating means the unit draws about 4.9 kWh over 24 hours, a moderate load for a single-phase 230 V circuit. The 900 mm width, 690 mm depth and 810 mm height fit under standard worktops, and the 86 kg weight allows two people to move it without a trolley. The refrigerant R290 is a hydrocarbon with low global-warming potential, meeting current environmental standards.
Clean the interior with a damp cloth and mild detergent; the smooth stainless-steel surfaces wipe clean quickly. The automatic defrost system removes condensate without manual intervention, and the fan and coil are accessible from the technical compartment for occasional dusting. The exterior can be wiped down with the same solution, and the touch panel should be cleaned with a soft, dry cloth to avoid damage.
The unit is supplied with one GN 1/1 shelf per door. Drawer configurations are available on request, and the table is prearranged for plinth installation. It meets Climatic Class 5, ensuring stable operation in environments up to +40 °C and high humidity.
This freezer table is listed in the GEMM refrigeration range under professional catering tables.