GEMM Refrigerated Table GN1/1 TNG7D/100 A for Professional Kitchens

A refrigerated table keeps prepared ingredients chilled at serving height while freeing under-counter space for other equipment. The cooling system circulates cold air evenly across every shelf, preventing hot spots that could spoil food. A remote condensing unit moves the heat-producing compressor outside the kitchen, cutting noise and heat where staff work. The insulated cabinet then holds the set temperature with minimal energy, even when the kitchen is busy and the door is opened repeatedly. To use the table, slide GN 1/1 gastronorm containers onto the included shelves. Set the desired temperature between -2 °C and +8 °C on the touch control panel. The digital display shows the current reading, and the automatic defrost cycle starts at intervals to keep the evaporator free of ice. Condensate is collected and evaporated by a heating element, so no external drain is needed. When the kitchen closes, the unit continues to run quietly, maintaining the set temperature until the next service. The cabinet is built from stainless steel, inside and out, for corrosion resistance and easy cleaning. A 50 mm insulation layer separates the inner and outer skins, reducing energy use and stabilising the internal climate. The worktop is also stainless steel, providing a durable surface for plating or temporary storage. Shelves are sized to hold GN 1/1 containers, keeping ingredients organised and accessible. The remote condensing unit can be positioned on either side of the table, allowing installation in kitchens with tight layouts. A 265 L capacity allows storage of multiple GN 1/1 containers, reducing the need to restock during service. The 1080 mm width, 700 mm depth and 950 mm height fit standard worktop layouts, while the 665 mm body height aligns with adjacent counters. A 100 kg weight means the table is moved with a trolley or two people, not carried by hand. The 0.406 kW power rating draws a modest load on a 230 V single-phase circuit, suitable for most commercial kitchens. The seamless stainless-steel surfaces let you wipe away spills and splashes from the worktop and door fronts in seconds, keeping the table ready for the next service without scrubbing. The automatic defrost system and condensate evaporation reduce manual maintenance. Shelves can be removed for thorough cleaning, and the worktop is wiped down after each shift to maintain hygiene. The TNG7D/100 A model is supplied with one GN 1/1 shelf per door. Custom drawer configurations are available on request, and the unit is prearranged for plinth installation if required. It meets Climatic Class 5, ensuring stable operation in environments up to +40 °C and high humidity. This refrigerated table is categorised under professional refrigeration for front-of-house storage.