More from this brand
Technical data
| Attributes | |
| ARTICLE | 60000410 |
| POWER | 0.49kW |
| SIZE L/W/H | 825/550/2600 mm |
| VOLTAGE | 1x230V ~ 50Hz |
| Temperature | +4/+16 °C |
| Model | WL6/126P |
| CAPACITY | 160 bottle |
| Refrigerant | R290 |
| Noise emission, dB | <43dba |
| NOTES | PASS-THROUGH DOOR VERSION; INTERNAL FITTINGS NOT INCLUDED |
Capacity – 160 wine bottles
1 pass-through door
A pass-through wine display cooler keeps bottles at serving temperature while letting staff reach them from either side of a bar or partition. The unit draws heat from the cabinet with a refrigeration circuit that circulates R290, a hydrocarbon refrigerant chosen for its low environmental impact and efficient heat transfer. A fan moves cooled air evenly across every shelf, so no bottle is warmer than the set point, and the same air flow carries away moisture that would otherwise condense as frost. An automatic defrost cycle melts any ice that forms, and the resulting water is evaporated or drained without manual intervention, so the cooler runs continuously without stopping for cleaning. To load the WL6/126P, open either of the two doors, place bottles on the shelves, and close the door. The touch control panel on the top frame lets the operator set the temperature between +4 °C and +16 °C, adjust the brightness of the internal LED lighting, and lock the settings with a key. The cooler starts as soon as it is plugged into a 230 V single-phase supply, and the digital display shows the current temperature and any active programmes. The cabinet is built from stainless steel, inside and out, for hygiene and resistance to corrosion. The exterior can be custom-painted to match a specific colour scheme. The doors are lockable, and the LED lighting is dimmable via remote control, allowing the display to be dimmed for closing time or brightened for service. The unit is designed to operate in ambient temperatures up to +30 °C with 55% relative humidity, so it remains stable in busy kitchens or warm dining areas. The 0.49 kW power rating indicates the load on the electrical circuit, which must be protected by a suitable fuse or breaker. The 825 mm width, 550 mm depth and 2600 mm height determine the floor space and vertical clearance needed; the pass-through design means the cooler can be built into a counter or partition without losing access from either side. The 160-bottle capacity is measured with standard Bordeaux bottles; actual capacity may vary with bottle shape and shelf arrangement. The noise level below 43 dB allows the cooler to be placed in customer-facing areas without disturbing conversation. The seamless stainless-steel cabinet lets you wipe spills and fingerprints from the pass-through doors in seconds, keeping the glass streak-free for uninterrupted customer views of your bottles. The automatic defrost and condensate removal systems eliminate the need for manual defrosting or drainage. Shelving and internal fittings are not included and must be ordered separately to suit the intended bottle sizes and display layout. The WL6/126P is available with either 6000 K white LED lighting or 2700 K warm lighting on request. A custom-painted exterior finish is also offered as an option.