Gredil central stainless-steel work table with shelf 600 x 600 mm

A stainless-steel work surface mounted on a square frame gives a stable, hygienic platform for food preparation, plating or assembly in professional kitchens and production areas. The flat top resists corrosion, does not absorb liquids and wipes clean after each service, while the shelf below doubles the usable area without increasing the footprint.

The table stands on four vertical legs joined by horizontal rails, creating a rigid structure that does not sway under load. A laminated board bonded to the underside of the worktop prevents sagging and adds stiffness, so the surface stays level even when heavy trays or equipment are placed on it. The legs fold inward, reducing the width for transport and storage, and bolt together on site with screws that draw the frame tight and square.

To assemble, unfold the legs, align the rails and secure each joint with the supplied screws. Place the table on a level floor, load the worktop with ingredients, utensils or small appliances, and use the shelf below for storage of bowls, containers or dry goods. After service, wipe the stainless-steel surfaces with a damp cloth and mild detergent, then dry to prevent water marks.

The construction is stainless steel throughout, with 40 × 40 mm tubular legs and a worktop reinforced by a laminated board. No raised edge is fitted, so spills run off and cleaning is straightforward. The overall dimensions of 600 mm wide, 600 mm deep and 850 mm high create a compact unit that fits between existing equipment or against a wall, while the 600 mm width matches standard worktop depths and allows two tables to be placed side by side for a continuous run.

The table is supplied as a single article without variants.