GREDIL Stainless Steel Adjustable Hanging Shelf 800

An adjustable hanging shelf creates storage that moves with the kitchen. The shelf hangs from vertical rails or brackets fixed to the underside of worktops, cupboards or trolleys. Adjustment slots let the operator raise or lower the shelf without tools, so the gap above it can hold shallow trays one day and tall stockpots the next. The method keeps the load off the floor and leaves the worktop free for food preparation.

To fit the shelf, the operator slides the hanging hooks into the slots on the rail, then lowers the shelf until the hooks lock. The process repeats for the second rail. Once both sides are secure, the shelf is levelled by sliding it side to side until it sits evenly. No fasteners are needed, so the height can be changed in seconds whenever the kitchen reorganises.

The shelf is made of stainless steel, which resists corrosion from steam and cleaning chemicals. The surface is smooth, so spills wipe off without staining. Assembly tools are included in the packaging, and the shelf arrives flat for easy transport.

The shelf measures 800 mm wide, 300 mm deep and 400 mm high from the rail to the underside. The width matches standard kitchen furniture, so it fits between existing units without gaps. The depth leaves room for plates or containers without overhanging the worktop below. The height allows clearance for most kitchen containers while keeping the shelf within reach.

The shelf is equipped with a protective equipotential pin, which connects to the kitchen's earth system to prevent static build-up and reduce the risk of electrical faults.

Cleaning is straightforward: the shelf is wiped down with a damp cloth and mild detergent. The stainless steel surface does not absorb odours or harbour bacteria, so it meets hygiene standards without special treatment. The shelf is delivered in compact cardboard packaging to protect it during transport.