GREDIL Stainless Steel Sliding Door Storage Cabinet 1200 951607120S

A sliding door storage cabinet keeps ingredients, utensils and crockery organised without needing swing space in a busy kitchen. The door panel glides along a track mounted above and below, clearing the full width of the cabinet face in one smooth motion. This design allows the unit to stand flush against walls or other equipment, saving valuable floor space while still providing full access to the interior.

Inside the cabinet, adjustable shelves let the operator tailor the storage to different container heights. Each shelf rests on movable brackets that clip into vertical slots in the side panels, so the spacing can be changed without tools. The shelves themselves are flat, rigid surfaces that support evenly distributed loads without sagging, making them suitable for heavy pots, stacked plates or bulk dry goods.

The cabinet is loaded by placing items on the shelves, then the door is pushed along its track to close. When access is needed, the door is pulled open again, revealing the full interior width. The sliding mechanism requires no floor clearance, so the cabinet can be positioned in tight corners or narrow aisles where a hinged door would obstruct movement.

Constructed from stainless steel, the cabinet resists corrosion from kitchen moisture and cleaning chemicals. The material is non-porous, so it does not absorb odours or harbour bacteria, and it can be wiped clean with a damp cloth. The exterior and interior surfaces are smooth, with no sharp edges or crevices that could trap debris.

The cabinet arrives in compact cardboard packaging, with assembly tools included. The protective equipotential pin ensures the unit can be safely connected to the kitchen's earth bonding system, preventing static build-up and reducing the risk of electrical hazards.

With a footprint of 1200 mm wide by 700 mm deep, the cabinet fits into standard kitchen layouts, providing 1800 mm of vertical storage. The height allows it to store large trays or tall containers while still leaving clearance for overhead lighting or ventilation. The weight of the unit means it is moved into position before assembly, then remains fixed in place during use.