GREDIL Unloading Table for Dishwasher 1000 954787100

An unloading table for a commercial dishwasher provides a dedicated worktop immediately beside the machine's exit. Plates, glasses and cutlery emerge hot and wet; the table holds them while gravity drains the last rinse water back into the machine's sump or a separate drain channel. A flat, stable surface lets staff sort, stack and polish without moving items to a distant counter, cutting the risk of breakage and speeding the return of clean ware to service.

The operator slides each rack from the dishwasher onto the table, where it rests at a comfortable working height. Adjustable shelves below the worktop can be set to hold trays, inserts or additional racks, keeping everything within arm's reach. The table's depth matches the width of standard dishwasher racks, so nothing overhangs and the entire load is supported.

The table is assembled from stainless steel panels and tubular legs. All edges are rolled or welded to eliminate sharp corners, and the worktop is seamless to prevent water pooling. Adjustable feet allow the unit to be levelled on uneven floors, and an equipotential pin ensures the metal frame is safely bonded to the kitchen's earth system.

Controls are limited to the adjustable feet and shelf supports. The feet are turned to raise or lower each corner until the worktop is level; the shelf pins slot into pre-drilled holes at the desired height.

A footprint of 1000 mm by 670 mm fits directly beside most pass-through and under-counter dishwashers, leaving enough space for staff to stand and work. The 870 mm height aligns with standard worktop levels in professional kitchens, so plates and cutlery can be slid straight from the dishwasher rack onto the table without lifting. The stainless steel construction resists corrosion from water and detergents, and the seamless worktop can be wiped clean in seconds.

The table is delivered flat-packed in cardboard for easy transport. Assembly tools are included, and the adjustable shelves can be fitted or removed without additional hardware. No electrical supply is required, so the unit can be positioned anywhere a drain is available.