ICE TECH BCD400 Ice Storage Bin with Trolley for 413 kg

An ice storage bin with an integrated trolley keeps large quantities of ice ready for immediate use and moves them without lifting. The BCD400 from ICE TECH holds the ice in an insulated container that slows melting, while the trolley frame and castors let a single operator wheel the full load across a kitchen, production floor or cold room. The method suits any setting where ice is produced in one place and used in another, or where demand fluctuates and a reserve must be kept on hand.

The bin receives ice directly from an ICE TECH ice maker through a chute or port at the top. Once inside, the ice rests on a perforated floor that allows meltwater to drain away, keeping the remaining ice dry and free-flowing. The container is sealed with a lid that reduces exposure to ambient air, and the walls are insulated to maintain low temperature. When ice is needed, the operator opens the front door or slides the lid aside, scoops out the required amount, and closes the bin again. The trolley frame remains attached at all times, so the bin can be moved as soon as it is filled or whenever the work area changes.

To use the BCD400, the operator first positions the bin next to the ice maker and connects any required chute or hose. The ice maker is started, and ice flows into the bin until the desired level is reached or the maker stops automatically. The lid is closed, and the bin is wheeled to the point of use. Throughout service, the operator checks the ice level and tops up the bin as needed by running the ice maker again. Meltwater drains through the perforated floor into a tray or pipe, which must be emptied or connected to a waste line to prevent overflow.

The BCD400 is built from stainless steel for the container, lid and trolley frame. The walls are insulated with a layer of foam or similar material to reduce heat transfer. The trolley frame has four castors, two of which are lockable to hold the bin in place during loading and unloading. The front door is hinged and fitted with a handle for easy access, while the lid may be hinged or removable depending on the installation.

Controls are minimal: a handle on the front door and a latch or lock to secure it, plus any drainage valve or tap for meltwater. The lid may have a simple latch or clip to keep it closed during transport.

A capacity of 413 kg means the bin can hold enough ice for a full service in a busy kitchen, supermarket or production line without constant refilling. The 0.85 m³ volume indicates the internal space available for ice, meltwater and air circulation. The footprint of 1524 by 1016 mm determines the floor space the bin occupies, while the 1520 mm height sets the clearance needed above it. The 413 kg weight affects how the bin is moved: the trolley castors must support the full load, and the frame must be sturdy enough to prevent tipping.

Cleaning involves removing any remaining ice, wiping down the interior with a sanitising solution, and rinsing the meltwater tray or pipe. The exterior is cleaned with a damp cloth and mild detergent. The castors should be checked regularly for smooth movement and lubricated if necessary. The lid and door seals should be inspected for wear and replaced if they no longer close tightly.

The BCD400 is part of the ICE TECH BCD series, which includes bins of different capacities and configurations. It is compatible with ICE TECH SC series flake ice machines, FD/HD cube ice machines and GR series granular ice machines.

In the ICE TECH catalogue, the BCD400 is listed under ice storage and handling equipment, alongside ice makers and accessories for professional catering and food production.