IGLOO Showcase MIŁOSZ 2 1.6 REMOTE for Meat Display

A ventilated meat showcase keeps chilled air moving across every shelf and hook, so each cut stays at the same temperature and colour without drying out. The fan draws warm air from the display area, passes it over a refrigerated coil, then returns it as cold, dry air that clings to the product. This steady circulation also prevents condensation from forming on the glass, so customers see the meat clearly at all times.

To load the MIŁOSZ 2, slide the night blind up and lift the curved glass lid. Two rows of stainless-steel hooks can be set at different heights and angles to hold whole joints, racks or individual cuts. Once the meat is arranged, close the lid and set the electronic thermostat to the desired temperature between +6 °C and +12 °C. The digital display shows the current reading. The showcase then maintains the chosen temperature automatically, defrosting the coil on a timed cycle so the fan never has to stop.

The interior is built from stainless steel, which resists corrosion and wipes clean quickly. The upper advertising panel is lit by LED strips behind coloured organic glass, while daylight LEDs inside the cabinet illuminate the meat evenly. A separate external condensing unit supplies the refrigerant, keeping the noise and heat outside the shop.

The 1530 mm width gives space for a full range of cuts without crowding, while the 630 mm height fits under most worktops. A 230 V single-phase supply is standard in British commercial kitchens and shops, so the unit plugs straight into a dedicated circuit without rewiring. The night blind rolls down after hours to reduce energy use and protect the stock.

Cleaning involves wiping the stainless-steel interior with a mild sanitiser, brushing the hooks and rinsing the condensate tray beneath the coil. The glass lid lifts off for thorough cleaning, and the LED panels are sealed behind the organic glass, so they never need dusting.

The MIŁOSZ 2 1.6 REMOTE is supplied with a choice of organic-glass colours for the top panel. It is designed for use with one of the listed refrigerants: R404a, R507, R448, R449, R450, R407F or R452. The catalogue places it in refrigerated display equipment for butchers and delicatessens.