LF Snap-In Gasket 710 x 670 mm for Professional Refrigeration Doors

A snap-in gasket forms a continuous seal between a refrigeration door and its cabinet, blocking warm air from entering and cold air from escaping. The flexible lip presses against the metal frame when the door closes, creating an airtight barrier that keeps the internal temperature stable and reduces the load on the compressor.

The operator removes the old gasket by pulling it free from the retaining channel around the door perimeter. The new gasket is pressed into the same channel, starting at one corner and working around the frame until the entire length is seated. No adhesive or tools are required; the snap-in design holds the gasket firmly in place once it is fully inserted.

This gasket is made in grey and measures 710 mm by 670 mm. It fits specific models of Friulinox and Hiber refrigeration units. The size can be ordered to match the exact door dimensions required.

The 710 mm length corresponds to the top or bottom edge of the door, while the 670 mm measurement matches the side edges. These dimensions ensure the gasket covers the full perimeter without gaps or overlaps that could compromise the seal.

Cleaning is limited to wiping the gasket surface with a damp cloth to remove dust or spills. The material is not designed for immersion or high-pressure washing, as these can damage the snap-in retaining lip.