Novameta 1700 mm worktop for dishwasher connection

A stainless steel worktop designed to link a commercial dishwasher seamlessly with kitchen operations. The unit's height aligns with most under-counter and pass-through dishwashers, enabling plates, cutlery and glassware to move straight from the final rinse onto the table without manual lifting or tilting.

The concept focuses on efficiency: a sturdy, flat surface at the right height eliminates the need to transport racks across the kitchen. Dirty items are loaded into the dishwasher, washed, and emerge onto the adjacent table for sorting, drying and storage without leaving the immediate work area. This setup minimises floor clutter, reduces handling and accelerates the turnover of clean tableware during busy service periods.

To install, place the table directly against the dishwasher's exit side. Adjust the feet so the worktop sits flush with the dishwasher's output tray. Operate the dishwasher as usual; once the cycle completes, clean racks slide out onto the table. Staff can then unload, check and redistribute items without stepping away from the station.

Construction features stainless steel throughout, welded and polished for hygiene. The open underside allows easy cleaning and inspection. Four adjustable feet provide stability and compensate for uneven floors. The worktop is a single, seamless sheet, preventing dirt accumulation and simplifying maintenance.

The table's dimensions are 1700 mm in length, 700 mm in width and 900 mm in height. These measurements offer ample space for multiple racks of plates or glassware, while the 700 mm depth keeps everything within reach without encroaching on the aisle. The 1700 mm length fits two standard dishwasher racks side by side or one wide rack with additional sorting space.

Cleaning is simple: wipe the worktop with a damp cloth and mild detergent after each service. The open underside prevents debris build-up, and the adjustable feet allow easy mopping underneath. The stainless steel surface resists stains and corrosion, maintaining its appearance with minimal effort.

This model excludes a shelf, keeping the underside clear for cleaning and ensuring the table remains lightweight and easy to position during setup.