Novameta adjustable-height worktable BHS-RSV-150/60/90

A stainless steel worktable built for continuous use in professional kitchens, combining a rigid pressed sandwich top with a height-adjustable underframe. The table provides a stable, hygienic surface for food preparation, plating or holding equipment while allowing the operator to set the working height between 800 mm and 1000 mm to suit different tasks or staff.

The pressed sandwich construction of the top spreads the load evenly across the entire surface, preventing sag or flex under heavy pans, mixers or bulk ingredients. A welded stainless steel frame transfers that weight directly to four tubular legs, each fitted with adjustable feet that compensate for uneven floors and keep the table level. The height is changed by a simple control panel mounted beneath the top; once set, the mechanism locks securely so the table remains at the chosen height without drift or vibration.

To use the table, the operator selects the desired height on the control panel, then loads the top evenly up to the 120 kg maximum. The same 120 kg limit applies to any additional shelf fitted below. Adjustable feet are turned by hand to level the table on the floor, and the upstand—if ordered—runs along the back edge to contain spills and prevent items sliding off.

The entire structure is made from stainless steel: the 40 × 40 mm tubular legs, the welded frame, the pressed sandwich top and the control panel. Adjustable feet have a 65 mm range, allowing the table to be raised or lowered by 30 mm above or 35 mm below the nominal setting.

A 1500 mm length gives ample linear workspace for multiple stations or large trays, while the 600 mm depth keeps everything within easy reach. The 900 mm overall height (at nominal setting) fits beneath standard overhead shelves and extractor canopies. The 120 kg load rating means the table can support bulk ingredients, heavy appliances or stacked gastronorm containers without risk of deformation.

Cleaning is limited to wiping the stainless steel surfaces with a damp cloth and mild detergent; the pressed sandwich top has no seams or crevices that trap food debris. The control panel is sealed to prevent ingress of water or cleaning agents, and the adjustable feet can be removed for thorough cleaning of the floor beneath.

Two widths are available: 650 mm and 700 mm, each with the same 1500 mm length and 900 mm height. Both versions accept the optional upstand and additional shelf.

The table is listed in the Novameta catalogue under preparation surfaces and modular kitchen furniture.