Novameta adjustable-height worktable with shelf BHS-RLV-100/60/90

A stainless-steel worktable that moves up and down on demand keeps the worktop at the right ergonomic height for every task. Instead of fixed legs, a welded frame carries a motorised column that raises or lowers the pressed sandwich top. The operator sets the desired height with a simple control panel, and the table travels smoothly between 800 mm and 1000 mm without vibration or noise that could disturb nearby staff.

To use the table, the operator first unlocks the control panel and selects the target height. The motor drives the column until the top reaches the chosen level, where it locks automatically. Once the height is set, the tabletop and shelf each support up to 120 kg of evenly distributed load—pans, trays, mixers or prep ingredients. Adjustable feet at each corner compensate for uneven floors, levelling the table so that liquids do not run off the surface.

The construction is a welded stainless-steel frame with 40×40 mm tubular legs. The worktop is a heavy-duty pressed sandwich panel that resists dents and spills, while the undershelf is a flat stainless-steel plate. A low upstand can be added to contain minor spills without reducing usable area. The height control panel is sealed for easy wiping, and the entire unit is designed for daily cleaning with standard kitchen sanitiser.

The footprint of 1000 mm by 600 mm fits between standard kitchen runs, while the adjustable height range covers everything from low prep to high plating. Each shelf carries the same 120 kg load rating, allowing the table to double as a temporary storage point during service. Adjustable feet with a 65 mm range ensure the table sits level on any commercial floor.

Two versions are available: one with a full-height upstand and one without. Both share the same welded frame, motorised column and pressed sandwich top.