Novameta BHS-IPSO-120/60/90 table to dishwasher with long rolls and grid shelf 1200

A stainless steel worktop mounted on a sturdy frame, designed to bridge the gap between a preparation area and a commercial dishwasher. The surface is fitted with long, free-running rolls that let trays and racks glide smoothly from one station to the next without lifting. A grid shelf beneath the worktop provides open storage for clean plates, bowls or utensils, keeping them within arm's reach while the operator loads the dishwasher above.

The principle is simple: gravity and low friction replace manual carrying. Rolls reduce the effort needed to move heavy or stacked items, and the shelf below keeps the most frequently used items organised so the operator can retrieve them without turning away from the workflow. The height of 900 mm matches standard dishwasher openings, so trays slide straight in without tilting or jamming.

Use begins by placing clean, empty racks or trays on the rolls at the far end of the table. As each load is unloaded from the dishwasher, it is pushed along the rolls to the next station—whether that is a drying area, a plating station or a storage cupboard. The grid shelf beneath holds the next set of clean items, ready to be transferred onto the rolls once the previous load has moved on. No lifting is required between the dishwasher and the table, and the shelf below keeps the workspace uncluttered.

Construction is stainless steel throughout, chosen for hygiene and resistance to corrosion in a wet environment. The frame is welded for stability, and the rolls are mounted on sealed bearings that require no lubrication. The grid shelf is removable for cleaning and can be repositioned or replaced if damaged.

The footprint of 1200 x 600 mm fits neatly alongside most commercial dishwashers, leaving enough space for an operator to stand between the two units without crowding. The height of 900 mm ensures the rolls align with the dishwasher's entry point, eliminating the need to lift trays above waist level. The table is delivered fully assembled, ready to be positioned and connected to the workflow.

Cleaning is straightforward: the stainless steel surface and rolls can be wiped down with a damp cloth and sanitiser after each service. The grid shelf is lifted out and washed separately, and the frame can be cleaned underneath to prevent build-up of debris. No disassembly is required for daily maintenance, and the sealed bearings prevent water ingress during cleaning.

The table is supplied as a single unit, with no variants or additional options listed.