Novameta BHS-PRA-100/60/85 stainless steel catering table with twin sinks 1000

A stainless steel catering table with two deep sinks built into the worktop gives a single station for food preparation, washing and draining without moving between separate units.

The table provides a flat, hygienic surface for chopping, mixing or assembling dishes. Below the worktop, two sinks allow simultaneous washing of ingredients, utensils or small equipment. The sinks are set side by side so one can be used for soaking or rinsing while the other drains, keeping the workflow continuous. No shelf is fitted beneath, leaving the space under the sinks clear for standing waste bins or mobile racks.

To use the table, the operator places ingredients or tools on the worktop, fills one or both sinks with water, and washes items as needed. The depth of the sinks prevents splashing onto the surrounding worktop. After use, the sinks are emptied by lifting the waste plugs, and the entire surface is wiped down with sanitiser.

The construction is stainless steel throughout, chosen for its resistance to corrosion, heat and repeated cleaning. The worktop and sinks are seam-welded to eliminate crevices where dirt could collect. The table stands on adjustable feet to level it on uneven floors.

The overall dimensions of 1000 mm wide, 600 mm deep and 850 mm high match standard kitchen worktop heights, allowing the table to integrate with existing counters or stand alone as a dedicated washing station. The 1000 mm width provides enough space for two sinks and a working area between them, while the 600 mm depth keeps everything within easy reach.

Cleaning involves wiping the worktop and sinks with a damp cloth and mild detergent, then rinsing and drying to prevent water marks. The absence of a shelf simplifies access to the underside for periodic cleaning of the legs and feet.

The table is supplied as a single unit with no variants or accessories listed.