Novameta BHS-RSV-310/60/90 adjustable-height catering worktable with grid surface 3100

The table's surface is a pressed sandwich of metal sheets bonded under pressure. This construction spreads weight evenly across the entire top, preventing sag even when heavy trays or bulk ingredients are placed on it. The grid pattern pressed into the top allows air to circulate beneath items, keeping food surfaces drier and reducing condensation.

To adjust the height, the operator presses the control panel on the underside of the table. Electric actuators inside the legs lift or lower the entire frame in unison, maintaining a level surface throughout the movement. The adjustment range of 800 to 1000 mm accommodates standing workers of different heights and can also be set to match the height of adjacent equipment such as hobs or sinks.

The table is loaded by placing ingredients, utensils or containers directly on the grid top. When the task is complete, the surface is wiped down; the pressed pattern leaves no crevices where debris can lodge. The welded stainless-steel frame and 40 × 40 mm tubular legs provide a rigid structure that resists twisting or wobbling under load. Each leg ends in an adjustable foot that can be raised or lowered by 65 mm, allowing the table to be levelled on uneven floors or to clear small obstacles.

The 3100 mm length gives a continuous work area large enough for multiple staff to work side by side without crowding. The 600 mm depth keeps everything within easy reach while leaving space for under-table storage or trolleys. A uniform load capacity of 120 kg across the entire top means heavy mixing bowls or stacked trays can be placed anywhere without risk of overloading a single leg.

An optional upstand can be fitted along the rear edge to prevent spills from running onto the floor. The table is supplied with adjustable feet, control panel and welded frame as standard; no additional components are required for installation.