Novameta BHS-STL4-140-50-180 Metal Shelving Unit

A static shelving unit provides organised storage without moving parts or power. It holds ingredients, crockery, utensils and packaged goods at a fixed height, keeping them accessible while freeing worktop and floor space. The open construction allows air to circulate, preventing condensation on stored items and making it easier to spot what is needed during service. The unit is assembled from vertical posts and horizontal shelves. Each shelf rests on brackets that clip into the posts, allowing the spacing between shelves to be adjusted without tools. This flexibility lets the operator tailor the unit to the height of stored items, from shallow trays to tall containers. The shelves themselves are flat, rigid panels that support the load evenly across their surface. To use the shelving unit, the operator first assembles the frame by connecting the vertical posts with the horizontal braces. The shelves are then positioned at the desired heights and secured with the locking clips. Items are placed directly onto the shelves, with heavier loads distributed towards the rear and centre to maintain stability. The open sides allow access from any direction, so the unit can be placed against a wall or used as an island in the middle of the kitchen. Construction is entirely in metal. The vertical posts and horizontal braces form a rigid frame that resists bending under load. The shelves are solid panels, not grilles or mesh, providing a continuous surface that prevents small items from tipping or falling through. The entire unit is finished in a protective coating that resists corrosion and makes cleaning easier. The unit measures 1400 mm wide, 500 mm deep and 1800 mm high. The width allows it to span the space between standard kitchen cupboards or worktops, while the depth keeps stored items within easy reach without overhanging into walkways. The height provides multiple storage levels without requiring a step stool for the top shelf. Each shelf is rated to support up to 120 kg, allowing the unit to hold bulk ingredients, stacked crockery or heavy equipment without sagging. The smooth powder-coated steel shelves wipe clean in seconds without trapping grease or dust between joints. The shelves can be wiped down with a damp cloth and a mild detergent, as there are no moving parts or crevices to trap debris. The metal construction does not absorb odours or stains, and the protective finish prevents rust when the unit is kept dry. The open design means there are no enclosed spaces where dirt can accumulate, and the shelves can be removed for more thorough cleaning if needed. The Novameta BHS-STL4-140-50-180 is a single configuration with no variants. It is categorised under static storage in the professional catering equipment catalogue.