Novameta BHS-TPLO-130/60/90 table to dishwasher with shelf and rolls

A stainless steel worktop table designed to bridge the gap between a commercial dishwasher and the kitchen work flow. The unit provides a smooth, continuous surface where staff can slide racks of washed dishes from the dishwasher's exit onto short roller sections, allowing gravity to carry them along without lifting. A fixed shelf beneath the worktop creates a second level for storing clean plates, trays or utensils within arm's reach, keeping the main work surface clear for immediate sorting and drying.

The principle is simple: after the dishwasher's final rinse, racks are pushed onto the rollers, which reduce friction so that even heavy loads can be moved with minimal effort. The shelf below holds items that are ready for use, cutting down on steps between the dishwasher and the service or storage areas. Because the table is positioned directly against the dishwasher, it eliminates the need to carry racks across open floor space, reducing the risk of spills and speeding up the turnaround of clean dishes.

To use the table, staff first position it flush against the dishwasher's exit side. Racks of clean dishes are pulled from the dishwasher and placed onto the roller section, where they glide forward under their own weight. Items that need to dry further or be sorted are left on the worktop, while those ready for storage are transferred to the shelf below. The process keeps dishes moving in a straight line, minimising handling and maximising efficiency in a busy kitchen.

The construction is entirely stainless steel, chosen for its resistance to corrosion, heat and constant moisture. The worktop is a single sheet with rolled edges for safety, while the shelf is a flat panel supported by welded brackets. The short roller section consists of individual plastic rollers mounted between two stainless steel rails, allowing smooth movement without the need for lubrication. The legs are adjustable to ensure the table sits level on uneven floors.

The overall dimensions of 1300 mm long, 600 mm deep and 900 mm high create a compact footprint that fits alongside most under-counter or pass-through dishwashers. The length provides enough space for two standard dish racks to sit side by side on the rollers, while the depth keeps the shelf accessible without overhanging into walkways. The height matches typical worktop levels, ensuring a seamless transition from the dishwasher to the table surface.

Cleaning is straightforward: the stainless steel surfaces can be wiped down with standard kitchen sanitiser, and the rollers can be removed for thorough cleaning if debris accumulates. The shelf and worktop should be cleared of items before cleaning to prevent water pooling, and the adjustable feet should be checked periodically to maintain stability.