More from this brand
Technical data
| Attributes | |
| ARTICLE | BHS-TPLO-210/60/90 |
| SIZE L/W/H | 2100 / 600 / 900 |
A stainless steel worktop table designed to streamline the transfer of dishes from the kitchen to the dishwasher. The integrated short rolls allow trays, racks and plates to glide smoothly across the surface, reducing manual lifting and speeding up the loading process. A fixed shelf beneath the worktop provides organised storage for detergents, rinse aids or clean dishware, keeping essentials within reach without cluttering the work surface.
The table acts as a staging point between the kitchen and the dishwasher. Dirty plates, cutlery and glassware are placed on the worktop, then slid along the rolls into the dishwasher rack. Once washed, the clean items are pulled back onto the table for sorting, drying or direct return to service. The shelf below holds the chemicals and tools needed for the wash cycle, so operators do not have to leave the station.
Construction is fully welded stainless steel, chosen for hygiene and resistance to moisture and cleaning agents. The worktop is a single sheet, seamless and easy to wipe down. The rolls are mounted on fixed brackets, spaced to support standard dish racks without sagging. The shelf is a flat panel, positioned low enough to clear the dishwasher door when open.
No controls are fitted; the table is a passive support unit. Its 2100 mm length accommodates multiple racks side by side, allowing a continuous flow of dishes. The 600 mm depth matches standard dishwasher racks, so items slide straight in without overhang. At 900 mm high, the worktop aligns with most commercial dishwashers, eliminating the need to lift racks up or down. The unit is freestanding and can be positioned directly against a wall or between other workstations.
Cleaning is straightforward: the worktop and shelf are wiped with a damp cloth and sanitiser after each shift. The rolls are cleaned with a brush to remove food debris, and the underside of the shelf is checked for spills. No disassembly is required, and no moving parts need lubrication.
The table is supplied as a single unit, with no variants or options. It is placed in the catalogue under dishwasher accessories and pre-wash stations.