Novameta DPO-VLU-60/60/90 stainless steel worktable with hinged doors

A stainless steel worktable with hinged doors provides a solid work surface and enclosed storage in one unit. The flat top gives a stable area for food preparation, plating or holding equipment, while the doors below keep ingredients, utensils or small appliances out of sight and protected from kitchen traffic. The table stands on four legs that raise the top to standard worktop height. This allows the operator to work without bending, matching the height of adjacent hobs, sinks and other counters. The space beneath the top is fully enclosed by the doors, creating a cupboard that can be organised with shelves or left open for taller items. Hinged doors swing open to reveal the full width of the storage area, making it easy to load and unload without removing shelves or reaching around a fixed panel. To use the table, the operator places items on the top surface or opens the doors to access the cupboard below. The doors close securely, keeping stored items contained and reducing clutter on the work surface. The stainless steel construction resists corrosion from water, steam and cleaning chemicals, and the smooth surfaces allow quick wiping between tasks. The table is built from stainless steel throughout, including the top, doors, frame and legs. The 600 mm width matches standard modular kitchen equipment, allowing it to fit alongside other units without gaps. The 900 mm height places the work surface at a comfortable working level, while the 600 mm depth provides ample storage without protruding into walkways. The hinged doors are the only moving parts, and each door is fitted with a handle for easy opening and closing. No controls or settings are required; the table is ready for use as soon as it is positioned. The 600 mm width allows the table to slot into a standard kitchen run, fitting between other 600 mm units or filling a gap of the same size. The 900 mm height means the work surface aligns with adjacent counters, hobs and sinks, creating a continuous worktop. The 600 mm depth keeps the storage area accessible without extending too far into the kitchen, maintaining clear walkways. The stainless steel construction ensures the table withstands daily use in a busy kitchen, resisting dents, scratches and corrosion from water and cleaning products. The seamless stainless steel top and hinged doors are designed to shed water and grease, so a quick wipe after each shift keeps the work surface hygienic and ready for the next prep cycle. The hinged doors should be opened to clean the interior, and any shelves or dividers can be removed for thorough cleaning. The smooth surfaces prevent dirt from accumulating, and the corrosion-resistant material allows frequent washing without damage. The table is available in two widths: 650 mm and 700 mm, each with the same 600 mm depth and 900 mm height. These variants allow the table to fit different kitchen layouts while maintaining the same worktop height and storage capacity. This worktable is listed in the Novameta catalogue under tables and work surfaces for professional catering kitchens.