Novameta equipment shelf 600-5 with three shelves

An equipment shelf supports heavy appliances and utensils above the worktop, keeping the floor clear and the workspace organised. The unit is fixed to the wall with brackets, transferring the weight directly to the building structure rather than relying on legs or a base. This arrangement allows the full depth of the shelf to be used without obstruction, and the open underside simplifies cleaning beneath the unit. Three flat shelves are spaced vertically, each capable of holding up to 50 kg when the shelf is properly mounted. The shelves are rigid and level, preventing items from sliding or tipping during use. Because the load is carried by the wall, the shelf can accommodate heavier items than a freestanding unit of the same size, making it suitable for professional appliances such as mixers, processors or bulk ingredient containers. To install the shelf, two wall brackets are secured to a solid wall at the correct spacing. Each shelf slides onto the twin wall brackets and clicks securely, leaving no play even when fully loaded with commercial mixers or bain-maries. Once mounted, the operator loads equipment onto the shelves, ensuring the total weight does not exceed the stated capacity. Items can be rearranged or removed as needed without disturbing the fixed structure. The shelf is constructed from stainless steel, a material chosen for its resistance to moisture, corrosion and frequent cleaning. The surface does not absorb odours or harbour bacteria, meeting the hygiene standards required in commercial kitchens and food production areas. The steel is thick enough to remain rigid under load and withstand daily impact from heavy items. Controls are not applicable; the shelf is a static structure. The dimensions of 600 mm width, 500 mm depth and 999 mm height define the space the shelf occupies on the wall and the area available for storage. The 50 kg capacity per shelf indicates the maximum safe load when the unit is correctly installed, guiding the selection of equipment that can be placed on it. The two wall brackets ensure stability and distribute the weight evenly across the mounting points. Moisture and grease lift away from the brushed stainless surface with a single pass of a damp cloth, so the shelf is ready for the next shift without residue. The open design allows access to all areas, and the absence of moving parts means there are no mechanisms to disassemble or lubricate. The shelf can be left in place during cleaning, and the smooth finish prevents dirt from adhering to the metal. Variants include different lengths and widths, allowing the shelf to be tailored to specific kitchen layouts. Custom manufacturing according to individual drawings is also available, ensuring the shelf fits precisely within the available space and meets the exact requirements of the site. The shelf is categorised under professional kitchen storage solutions, specifically designed for the placement of heavy equipment in commercial kitchens, food production facilities and industrial premises.