Novameta Height Adjustable Worktop for Professional Kitchens, 1200 x 600 mm

A height adjustable worktop brings the work surface to the operator, eliminating bending and reaching during long service periods. The table stands on a sturdy frame whose legs are extended or shortened by a mechanical or electric actuator, raising or lowering the entire top while keeping it level. This movement lets the same unit serve chefs of different heights, or switch between prep tasks that need a higher surface and plating that benefits from a lower one.

The operator loads the worktop with ingredients, tools or finished dishes, then sets the desired height using the control mechanism. Once the table is at the correct level, the surface remains stable under normal kitchen loads. When the task is complete, the table can be lowered for easier cleaning or raised again for the next shift.

Construction is stainless steel throughout, chosen for its resistance to corrosion, heat and repeated sanitising. The frame is welded for rigidity, and the legs are fitted with adjustable feet to level the table on uneven floors. The top measures 1200 mm by 600 mm, providing ample space for multiple trays or large containers without crowding.

Height adjustment is manual, using a crank handle or lever system that the operator turns until the surface reaches the required position. The mechanism is enclosed to protect it from spills and debris, ensuring smooth operation over time.

The overall height of 900 mm is the maximum setting; the table can be lowered to suit shorter users or specific tasks. The footprint of 1200 mm by 600 mm fits standard kitchen layouts, allowing the table to be positioned against a wall or between fixed equipment without obstructing traffic.

Cleaning is straightforward: the stainless steel top can be wiped down with standard kitchen sanitiser, and the frame is designed with minimal crevices to prevent dirt accumulation. The height adjustment mechanism requires occasional lubrication to maintain smooth movement, following the manufacturer's guidelines.

Two top thicknesses are available: 650 µm for general use, and 700 µm for heavier loads such as bulk prep or holding hot containers. The thicker top adds durability without increasing the overall weight significantly.

This table is categorised under worktops and prep surfaces in the Novameta professional range.