Novameta Height Adjustable Worktop for Professional Kitchens, 1700 x 600 mm

A height adjustable worktop lets kitchen staff set the surface to the task without bending or stretching. The table stands on a frame that moves up and down, so the operator can load heavy trays at waist height, then lower the top for prep work or raise it for plating at eye level. The mechanism is built into the legs, leaving the full area under the top clear for trolleys or cupboards.

The operator unlocks the adjustment, lifts or presses the top to the chosen height, then locks it again. Once set, the table stays at that level until the next task. The range of movement is fixed by the frame, so the top cannot be lowered too far or raised beyond its safe limit.

This Novameta table is built in stainless steel, a material that resists corrosion from water, steam and cleaning chemicals. The surface is a single sheet without seams, so liquids and food debris do not collect in gaps. The frame is welded for strength and stability, and the feet are adjustable to level the table on uneven floors.

The table measures 1700 mm long and 600 mm deep, giving a work area of just over one square metre. The height can be set to two standard positions: 650 mm for general work and 700 mm for plating or serving. The lower position is suitable for chopping and mixing, while the higher one brings the surface closer to eye level for arranging dishes.

Cleaning is straightforward: the stainless steel top is wiped down with a damp cloth and sanitiser, and the frame is cleaned with a mild detergent. The mechanism is enclosed, so it does not collect dirt or grease, but it should be checked periodically to ensure smooth operation.

The table is listed in the Novameta catalogue under worktops and preparation surfaces.