Novameta LSX1-140/30/30 Wall Shelf System for Professional Kitchens

A wall-mounted storage system organises worktop space without occupying floor area. The LSX1-140/30/30 from Novameta provides a single shelf supported by two brackets, creating a stable platform for ingredients, utensils or small equipment directly above the preparation zone. By lifting items off the work surface, the shelf keeps essentials within reach while freeing the counter for active tasks.

Wall shelving of this type relies on a cantilever principle: the brackets transfer the weight of the shelf and its contents to the wall structure rather than to the floor. Each bracket is fixed to a vertical surface with multiple fasteners, distributing the load across a wide area. The shelf itself is a flat panel that spans between the brackets, its depth chosen to match the reach of an average operator. This arrangement ensures that items placed on the shelf remain accessible without stretching or overreaching, reducing strain during repetitive tasks.

To install the system, the operator first marks the desired height on the wall, ensuring it clears any existing equipment or headroom restrictions. The two brackets are then secured to the wall at the marked positions, using fixings appropriate for the wall material. Once the brackets are level and firmly attached, the shelf panel is placed onto the bracket supports and locked into position. The completed assembly is ready to receive up to 50 kg of evenly distributed load, allowing the storage of bulk ingredients, stacked containers or lightweight appliances.

The LSX1-140/30/30 is constructed from stainless steel, chosen for its resistance to corrosion and ease of cleaning in food-handling environments. The brackets and shelf panel feature smooth, seamless surfaces that comply with hygiene standards, preventing the accumulation of dirt or moisture. The mechanical structure is engineered to maintain stability under load, with no moving parts that require adjustment or lubrication.

Controls are limited to the mechanical locking mechanism that secures the shelf to the brackets. This simple design ensures that the shelf remains firmly in place during use, with no risk of accidental displacement.

A load capacity of 50 kg indicates the maximum weight the shelf can safely support when evenly distributed. This specification allows the storage of bulk items such as sacks of flour, tins or stacked containers without risk of deformation or failure. The dimensions of 1400 mm in length, 300 mm in width and 300 mm in height define the footprint of the system, determining the wall space it occupies and the clearance required above and below it. The 300 mm depth is standardised to align with typical worktop depths, ensuring the shelf integrates seamlessly with existing kitchen layouts.

Cleaning the system involves wiping down the stainless steel surfaces with a damp cloth and a mild detergent. The absence of joints or crevices simplifies maintenance, as there are no hidden areas where debris can accumulate. The shelf can be removed from the brackets for thorough cleaning if required, though regular wiping is sufficient to maintain hygiene standards.

The LSX1-140/30/30 is one configuration of the Novameta LSX modular wall shelving system. Other lengths and depths are available, allowing the system to be tailored to specific room dimensions and workflow requirements. Bespoke solutions can also be manufactured according to individual project drawings, ensuring precise integration with existing equipment and spatial constraints.

The system is categorised under professional storage solutions for catering and food production environments, where durability, hygiene and efficient space utilisation are critical.