Novameta LSX1-150/50/30 Wall Shelf System for Professional Kitchens

A wall-mounted storage system that carries heavy loads without floor space. The LSX1-150/50/30 shelf system fixes directly to the wall, leaving the worktop and floor clear for movement and cleaning. Two stainless steel brackets transfer the weight to the wall structure, while the shelf itself provides a flat, stable surface for containers, utensils or ingredients. The design keeps items within easy reach, reducing bending and lifting in busy kitchens. The principle is mechanical simplicity: a rigid shelf supported by brackets that are anchored to the wall. Stainless steel is chosen for its strength-to-weight ratio and resistance to corrosion, which is essential in environments where steam, water and cleaning chemicals are constant. The shelf surface is smooth and seamless, preventing dirt traps and allowing quick wipe-downs between services. Because the system is wall-mounted, the floor beneath stays accessible for mopping and inspection, meeting hygiene standards in food production. To install, mark the bracket positions on the wall, drill and fix the brackets with suitable anchors for the wall material. The shelf then slides onto the brackets and locks into place. Once secured, the shelf can be loaded up to its 50 kg capacity. Items are placed directly on the shelf; there are no dividers or lips, so containers of any shape can be accommodated. The 1500 mm length spans a typical workstation, while the 500 mm depth keeps everything within arm's reach without overhanging the worktop below. Construction is entirely stainless steel, including the brackets, shelf and fasteners. The 300 mm height from the wall to the underside of the shelf allows for cleaning behind the unit and prevents dust accumulation. No moving parts or electrical connections are required, so maintenance is limited to periodic checks of the wall fixings and cleaning of the steel surfaces. The single control is the locking mechanism that secures the shelf to the brackets. Once engaged, it prevents accidental removal while allowing intentional disassembly for deep cleaning or reconfiguration. A 50 kg load capacity means the shelf can hold bulk ingredients, stacked trays or heavy equipment such as mixers or processors without sagging. The 1500 mm length provides ample linear storage for multiple containers side by side, while the 500 mm depth keeps the shelf compact enough to fit above standard worktops. The 300 mm height from wall to shelf underside ensures clearance for cleaning tools and prevents obstruction of wall-mounted taps or switches. The seamless stainless steel shelf resists grease and moisture, so a quick wipe after service restores a hygienic surface without scrubbing or rinsing. The absence of joints or crevices simplifies the process, and the material resists staining from food acids and alkalis. Wall fixings should be checked annually to ensure they remain tight and corrosion-free. Variants include different lengths and depths to match specific kitchen layouts. Custom sizes and configurations can be manufactured to order, allowing the system to integrate with existing equipment or fit irregular wall spaces. The LSX1-150/50/30 is part of the Novameta BHS range of modular storage solutions for professional kitchens and food production facilities.