Novameta LSX1-230/30/30 Wall Shelf System for Professional Kitchens

A wall-mounted storage system organises ingredients, utensils and small equipment within arm's reach while keeping worktops clear. The LSX1-230/30/30 shelf is fixed to the wall with three brackets that spread the load evenly across the full length, preventing sag and vibration under weight. Stainless steel construction resists corrosion from steam, splashes and frequent cleaning, so the shelf remains stable and hygienic in high-moisture environments.

The shelf is installed by marking the bracket positions on the wall, drilling and plugging the holes, then bolting the brackets in place. Once the brackets are level and secure, the shelf plate is laid across them and fastened with the supplied stainless-steel fixings. The 2300 mm length spans a typical run of wall space, while the 300 mm depth provides enough room for standard gastronorm trays, ingredient bins or stacked plates without overhanging into the aisle.

Three wall brackets support the shelf, each rated to carry a portion of the 50 kg maximum load. The brackets are spaced to prevent flexing, so heavy items such as stockpots or bulk ingredients can be stored without risk of the shelf bowing. The stainless-steel surface is smooth and non-porous, allowing quick wipe-downs between tasks and thorough sanitising at the end of service.

The 50 kg load capacity means the shelf can hold multiple filled containers or dense items without exceeding its safe working limit. The 2300 mm length suits standard kitchen wall runs, while the 300 mm depth keeps stored items accessible without encroaching on floor space. The 300 mm height from the wall to the underside of the shelf allows for cleaning behind the unit and prevents dust accumulation.

Stainless steel is used throughout for the shelf plate, brackets and fixings, ensuring durability and compliance with food-safety standards. The system is supplied with all necessary mounting hardware, and additional shelves or brackets can be ordered separately to extend the run or increase capacity. Custom lengths and depths are available for projects that require exact dimensions to fit existing layouts or workflows.

Cleaning involves wiping the shelf and brackets with a damp cloth and mild detergent, then drying to prevent water spots. The smooth surface does not trap grease or debris, so maintenance is quick and straightforward. The shelf should be checked periodically for loose fixings or signs of wear, particularly if heavy loads are moved frequently.