Novameta LSX1-80/40/30 Wall Shelf System for Professional Kitchens

A wall-mounted storage shelf system holds tools, ingredients and small equipment within arm's reach without claiming worktop space. The LSX1-80/40/30 is a single-level unit that fixes directly to the wall with two brackets, transferring the entire load to the building structure. This method keeps the floor clear, simplifies cleaning underneath and allows the shelf to carry heavier items than a freestanding unit of the same size. The shelf is loaded from above, so the operator places items directly onto the flat surface. No doors or drawers are fitted, so everything is visible and accessible at once. The 400 mm depth gives enough room for standard gastronorm trays, containers or bulk ingredients while keeping the front edge within easy reach. The 800 mm length creates a continuous run that can be repeated along a wall to form a longer storage line. Construction is entirely in stainless steel, including the shelf, brackets and all fastening hardware. Stainless steel resists corrosion from moisture and cleaning chemicals, does not absorb odours or bacteria, and can be wiped down quickly with a damp cloth. The surface finish meets hygiene standards for food-handling areas, so the shelf can be used in kitchens, prep rooms and production lines without risk of contamination. Two wall brackets support the shelf, spaced evenly along the 800 mm length. Each bracket is engineered to carry half the rated load, so the combined capacity of 50 kg is distributed across the wall fixings. The brackets are fixed with screws or bolts into solid masonry or studwork; the exact fixings are chosen on site to match the wall construction. The 50 kg load rating means the shelf can hold bulk ingredients, small appliances, stacked trays or utensils without sagging or loosening. The 800 mm length and 400 mm depth define the footprint on the wall, so the unit fits into a space 80 cm wide and projects 40 cm from the wall. The 300 mm height is the vertical clearance from the shelf surface to the underside of the brackets, giving room for taller items to stand upright. Stainless steel surfaces resist stains and corrosion, allowing quick sanitisation between shifts without disrupting kitchen workflow. No moving parts or crevices are present, so there are no areas that trap food debris or require disassembly. The shelf can be left in place during daily cleaning routines, and the open construction allows the floor underneath to be mopped without obstruction. The LSX1-80/40/30 is one size in the LSX modular range. Other lengths and depths are available, and the system can be custom-manufactured to match specific room layouts or workflow requirements. Novameta offers full project planning, from initial design through to installation, for bespoke shelving solutions in professional kitchens and food production facilities.