Novameta LSX1-90/40/30 Wall Shelf System for Professional Kitchens

A wall-mounted shelf system organises ingredients, utensils and small equipment within arm's reach while keeping worktops clear. The LSX1-90/40/30 unit fixes directly to masonry or stud walls with two stainless-steel brackets, creating a single shelf that projects 400 mm from the wall. This projection allows items to be stored above sinks, hobs or prep areas without obstructing workflow beneath.

The shelf itself is a flat stainless-steel tray supported by the brackets. Gravity holds the load in place; the brackets transfer the weight through the wall fixings into the building structure. Because the shelf is open underneath, air circulates freely, reducing condensation and making the surface easier to clean. The 300 mm height from shelf to underside of the bracket gives clearance for standard containers and stacked trays.

To install, the operator marks the fixing points on the wall, drills pilot holes, inserts wall plugs and screws the brackets into place. The shelf tray then slides onto the brackets and is secured with the supplied fasteners. Once mounted, the operator loads the shelf with items up to the stated capacity, ensuring the weight is evenly distributed across the tray to prevent sagging or tipping.

Construction is entirely stainless steel, including the brackets, tray and fasteners. The material resists corrosion from moisture, steam and cleaning chemicals, and its smooth surface can be wiped down quickly between shifts. The 900 mm length suits standard workstation widths, while the 400 mm depth balances reach and stability.

Controls are limited to the mechanical fixings: screws and brackets that hold the shelf in position. No electrical or programmable elements are present.

A 50 kg load capacity means the shelf can hold several full gastronorm containers, bulk ingredients or small appliances without risk of deformation. The 900 mm width spreads the load across two brackets, reducing the stress on any single fixing point. The 30 mm thickness of the tray and the engineered profile of the brackets prevent flexing under load.

Cleaning involves removing items, wiping the tray and brackets with a damp cloth and mild detergent, then drying to prevent water spots. The open underside allows access to the wall behind for periodic deep cleaning.

Variants include different lengths, depths and bracket spacings to match specific wall layouts and workflow requirements. Custom sizes and configurations can be manufactured to order based on individual kitchen drawings.

The LSX1-90/40/30 is part of the Novameta LSX modular wall shelving range, positioned for professional catering, food production and technical storage applications.