Novameta LSX2-130/30/60 Wall Shelf System with Two Shelves

Wall-mounted shelving creates storage directly above worktops, hobs and sinks without occupying floor space. The system uses vertical wall brackets secured to masonry or studwork; shelves rest on these brackets and are locked in place with retaining clips. This arrangement transfers the weight of stored items straight to the wall, allowing heavier loads than freestanding units of the same footprint. The open construction also permits air to circulate around stored goods, reducing condensation and simplifying cleaning beneath the shelves. Two shelves are fitted, one above the other. The operator loads each shelf from the front, placing items within easy reach without bending or stretching. The lower shelf sits at a comfortable working height, while the upper shelf is still accessible from a step or short ladder. Items are removed in the same sequence, keeping frequently used goods on the lower level and less-used items above. The system is built entirely from stainless steel, including the brackets, shelves and fasteners. Stainless steel resists corrosion from moisture, steam and cleaning chemicals, and does not harbour bacteria or mould. The surfaces are smooth and non-porous, allowing quick wipe-downs with a cloth or sponge. No paint or coating is applied, so the finish remains intact even after repeated scrubbing. Two wall brackets support the shelves. Each bracket is fixed to the wall with screws or bolts appropriate for the substrate. The shelves slide onto the brackets and are secured with retaining clips that prevent accidental dislodgement. The entire assembly is rigid once installed, with no wobble or flex under load. A total load capacity of 50 kg means the shelves can hold bulk ingredients, small appliances or stacks of crockery without risk of collapse. The 1300 mm length provides ample linear storage, while the 300 mm depth keeps items within arm's reach without overhanging work surfaces. The 600 mm height between floor and the top of the upper shelf allows clearance for most wall-mounted taps and splashbacks. Stainless steel surfaces shrug off kitchen grease and sanitising sprays, so a quick wipe between shifts restores the shelf to a food-safe finish without scrubbing or drying. No disassembly is required; the open design allows access to all surfaces. The stainless steel finish does not require polishing or protective treatments, so upkeep is limited to routine wiping after use. The LSX2-130/30/60 is one configuration of the LSX modular system. Other lengths and depths are available, and custom sizes can be manufactured to match specific kitchen layouts or project requirements. The system is designed for professional use in kitchens, food production facilities and technical rooms where hygiene and durability are essential. The product is listed in the Novameta catalogue under wall-mounted storage systems for professional catering environments.