Novameta LSX2-140/30/60 Wall Shelf System with Two Shelves

A wall-mounted storage system that creates two worktop-height shelves directly above the work surface, freeing floor space while keeping ingredients, tools and containers within arm's reach. Wall shelving of this type transfers the weight of stored items through vertical brackets into the wall structure, rather than relying on legs or a base. The brackets are fixed to solid masonry or steel studs with heavy-duty anchors, distributing the load evenly across the wall. Stainless steel shelves span between the brackets, forming rigid platforms that remain level under full load. This method eliminates the need for a floor footprint, allowing the space beneath to be used for mobile trolleys, under-counter refrigeration or open walkways. To install, the wall brackets are first positioned at the desired height and spacing, then secured with the supplied fixings. The shelves are lowered onto the brackets and locked in place with the integrated safety clips. Once mounted, the system is ready to receive containers, trays or loose items up to the stated capacity. No additional assembly or adjustment is required during daily use. The unit is constructed entirely from stainless steel, including the shelves, brackets and all fasteners. The material is non-porous, corrosion-resistant and withstands frequent exposure to moisture, steam and cleaning chemicals without staining or weakening. The surface finish is smooth and free of crevices, allowing quick wipe-down with a cloth or sponge. Two shelves are provided, each supported by two wall brackets. The shelves measure 1400 mm in length, 300 mm in depth and the overall height from floor to the top shelf is 600 mm. Each shelf is rated to support a distributed load of 50 kg. A 50 kg load capacity per shelf means the unit can safely hold multiple standard gastronorm containers, bulk ingredients in stainless steel bins or heavy hand tools without sagging or shifting. The 1400 mm length spans a typical worktop, allowing the shelf to align directly above prep areas, hobs or sinks. The 300 mm depth provides enough overhang to keep items clear of the wall while remaining within easy reach of an operator standing at the work surface. The 600 mm overall height places the lower shelf at a comfortable working level and the upper shelf within easy reach for most users. Cleaning involves wiping the shelves and brackets with a damp cloth and mild detergent after each shift. The welded stainless-steel frame arrives ready to bolt directly to the wall studs, cutting installation time in a busy kitchen. The stainless steel surface does not require protective coatings or special treatments, and the absence of moving parts eliminates the need for lubrication or adjustment. The LSX2-140/30/60 is one configuration within the Novameta LSX modular wall shelving range. Other lengths, depths and numbers of shelves are available to match specific room layouts and workflow requirements. Custom dimensions and bespoke configurations can be manufactured to order based on individual project drawings. The system is catalogued under commercial kitchen storage and wall-mounted shelving solutions.