Novameta LSX2-140/40/60 Wall Shelf System with Two Shelves

A wall-mounted storage system creates two fixed work levels above a counter or worktop, keeping ingredients, utensils and small equipment within arm's reach without occupying floor space. The shelves are rigidly supported by vertical brackets that transfer the weight directly to the wall, so the load capacity is determined by the strength of the wall fixings and the spacing between the brackets rather than by the shelf material itself. This method eliminates sagging and allows the shelves to carry heavier items than a freestanding unit of the same size.

The operator loads each shelf from the front, placing items directly on the stainless-steel surface. The 1400 mm length gives a continuous run for trays, containers or bulk ingredients, while the 400 mm depth keeps everything visible and accessible without over-reaching. Two shelves at 600 mm overall height provide a lower level for frequently used items and an upper level for less frequent access, organising the workflow vertically.

Construction is stainless steel throughout, including the shelves, brackets and all fasteners. The surface is smooth, non-porous and resistant to moisture, heat and cleaning chemicals, meeting the hygiene requirements of professional kitchens and food-production areas. The brackets are fixed to the wall with proprietary anchors that distribute the load evenly across the mounting points.

The system is supplied as a complete kit: two shelves, two wall brackets and all necessary fixings. No additional controls or settings are required; the shelves are ready for immediate use once installed.

A load capacity of 50 kg per shelf allows storage of bulk ingredients, small appliances or stacked containers without risk of deformation. The 1400 mm length suits standard worktop runs and fits between wall-mounted equipment such as hobs or sinks. The 400 mm depth balances accessibility with usable surface area, while the 600 mm overall height keeps the upper shelf within comfortable reach for most operators.

Cleaning is straightforward: the stainless-steel surfaces can be wiped down with a damp cloth and standard kitchen sanitiser. No crevices or joints trap food debris, so daily maintenance is quick and thorough. The brackets and fixings are also stainless steel, so they do not corrode or require special treatment.

The LSX2-140/40/60 is one configuration of the Novameta LSX modular wall shelving system. Other lengths and depths are available, and the manufacturer offers full project development, including custom dimensions, drawings and on-site installation to match specific kitchen layouts.