Novameta LSX2-150/40/60 Wall Shelf System with Two Shelves

A wall-mounted storage system keeps ingredients, utensils and small equipment within arm's reach without occupying floor space. The LSX2-150/40/60 unit provides two open shelves that sit one above the other, creating a vertical work zone directly on the wall. Each shelf is supported by two brackets, distributing the weight evenly and preventing sag even when fully loaded. The open design allows air to circulate freely, reducing condensation and making the surfaces easier to wipe down after service. The system is built entirely from stainless steel, a material that does not corrode, discolour or absorb odours. Its smooth, non-porous finish meets food-safety regulations and withstands daily cleaning with hot water and commercial detergents. Because the shelves are fixed to the wall, they remain stable under load and do not shift during use, so items stay secure while the kitchen is in full operation. Installation begins by marking the desired height and spacing on the wall. The two brackets are secured first, ensuring they are level and plumb. Once the brackets are secured to the wall studs, the shelves slide onto the horizontal rails and click into place without tools, leaving the underside fully accessible for mop heads and steam lances. Once mounted, the unit is ready to receive up to 50 kg on each shelf, allowing heavy containers, bulk ingredients or stacked trays to be stored safely off the worktop. The 1500 mm length spans a standard workstation, while the 400 mm depth keeps items within easy reach without overhanging into walkways. The 600 mm vertical clearance between shelves accommodates most commercial containers and small appliances. Because the system is modular, additional shelves or brackets can be added later if the workflow changes. A single pass with a microfibre cloth soaked in sanitiser lifts grease and spatter from the brushed finish, while the seamless welds prevent residue from collecting in corners. No moving parts or hidden crevices require disassembly, so maintenance is quick and does not interrupt service. The brackets and shelves are designed to remain securely in place during cleaning, so there is no need to remove items before wiping down. Variants of the LSX2 system are available in different lengths and depths to match specific room layouts. Custom configurations can also be manufactured from individual drawings, allowing the shelves to fit around existing equipment or follow the contours of the workspace.