Novameta LSX2-150/50/60 Wall Shelf System with Two Shelves

A wall-mounted storage solution that doubles usable space above a worktop without claiming floor area. Two horizontal shelves are fixed to the wall with sturdy brackets, creating two distinct storage levels for ingredients, utensils or small equipment. The upper shelf keeps frequently used items within easy reach, while the lower shelf can hold heavier or bulkier goods, keeping the work surface clear and organised. The system relies on the strength of the wall and the rigidity of the stainless-steel frame. Each shelf is a flat panel supported at both ends by brackets that transfer the weight directly to the wall fixings. The design eliminates sagging and vibration, even when fully loaded, so items remain stable during busy service. To install, the wall brackets are first secured to the wall at the chosen height. Each shelf slides onto its bracket until the weight of stored pans or trays automatically engages the safety latch, securing the shelf at the exact working height needed for repeated access. Once mounted, the system requires no further adjustment; operators simply place items on the shelves, ensuring the total weight does not exceed the rated capacity. The open construction allows air to circulate freely, reducing condensation and making cleaning straightforward. Construction is entirely in stainless steel, including the shelves, brackets and all fasteners. The material resists corrosion from moisture, steam and cleaning chemicals, and its smooth surface discourages bacterial growth, meeting the hygiene standards of professional kitchens. The edges are rolled to prevent sharp corners, and the finish is brushed to reduce glare under bright kitchen lighting. Controls are minimal: the system has no moving parts or electrical components. The only setting is the choice of shelf height during installation, which can be tailored to the operator's reach and the items stored. A load capacity of 50 kg per shelf means the system can support bulk ingredients, stacked containers or small appliances without risk of deformation. The 1500 mm width provides ample linear storage for standard gastronorm trays or multiple smaller items side by side. The 500 mm depth keeps everything within arm's reach, while the 600 mm overall height creates two usable tiers without encroaching on headroom. Stainless-steel surfaces shrug off splashes of boiling stock and caustic cleaners, so a single pass with a damp cloth restores the mirror finish required by health inspectors. The absence of seams, joints or moving parts means there are no crevices where dirt can accumulate. After cleaning, the shelves dry quickly and are immediately ready for use. The LSX2-150/50/60 is one configuration of the Novameta LSX modular system. Other lengths and depths are available, and custom dimensions can be manufactured to match specific kitchen layouts or project requirements.