Novameta LSX2-170/30/60 Wall Shelf System for Professional Kitchens

A wall-mounted storage system that creates two worktop-height shelves without floor supports, freeing the floor for trolleys, bins or foot traffic while keeping ingredients, utensils and small equipment within arm's reach. The system relies on cantilevered shelves fixed to the wall with three heavy-duty brackets. Each shelf projects horizontally, transferring the weight back to the wall rather than down to the floor. This arrangement leaves the space beneath completely open, so staff can move freely and cleaning equipment can pass without obstruction. The cantilever principle also allows the shelves to be positioned at any height, matching the workflow of the station they serve. To use the system, the operator loads each shelf evenly, keeping the total weight below the rated capacity. Items can be placed directly on the shelf surface or organised in containers. Because the shelves are open and unobstructed, everything is visible and accessible from the front, reducing the need to reach or bend. The wall brackets are spaced to prevent sagging, so the shelves remain level even under full load. Stainless steel shelves and brackets resist corrosion from steam and cleaning chemicals while supporting heavy pots and pans without warping. Stainless steel resists corrosion from moisture, steam and cleaning chemicals, and does not harbour bacteria, meeting the hygiene standards of professional kitchens. The surface is smooth and non-porous, so spills can be wiped away without staining or leaving residues. The system is fixed to the wall with three brackets, each positioned to distribute the load evenly. The shelves themselves are flat, solid panels with no lips or edges that could trap dirt. The depth of 300 mm provides enough space for standard gastronorm trays, containers or loose items without overhanging into the walkway. A load capacity of 50 kg per shelf means the system can hold bulk ingredients, stacked crockery, small appliances or heavy containers without risk of deformation. The 1700 mm length spans the width of a typical workstation, offering continuous storage along the wall. The 600 mm height from floor to the top shelf keeps items within comfortable reach for most operators, reducing strain and improving efficiency. The system is part of the LSX modular range, so additional shelves, brackets or lengths can be added later if the workflow changes. Custom dimensions and configurations are available for projects that require exact integration with existing equipment or room layouts. Cleaning is straightforward: the shelves can be wiped down with a damp cloth and sanitiser, and the open design allows access to the wall behind for periodic deep cleaning. Daily scrubbing with sanitising solutions can be done in place, leaving the shelves ready for the next service without downtime. Available in various lengths and depths to suit different kitchen layouts and workflows.