Novameta LSX2-170/40/60 Wall Shelf System with Two Shelves

The three stainless-steel brackets bolt directly to the wall studs, forming a rigid frame that keeps both shelves level and vibration-free even when pots and pans are slid across them during service. The shelves are held by brackets bolted directly to the wall, transferring the weight of stored items into the building structure rather than the floor. This arrangement keeps the area beneath the shelves clear for other equipment, trolleys or foot traffic, while the shelves themselves remain at a comfortable working height for loading and retrieval. The vertical gap between the shelves is chosen so that standard gastronorm trays, ingredient bins or prep containers can be slid in and out without tilting or jamming, making the system particularly suited to active kitchen workflows where items are frequently moved between storage and preparation stations. The operator begins by marking the wall at the desired height and spacing for the three brackets. Each bracket is secured with heavy-duty wall anchors appropriate for the substrate. Once the brackets are level and firmly fixed, the two shelves are lifted into place and locked onto the bracket arms with the supplied stainless-steel pins. The shelves are then ready to receive trays, containers or loose items up to the rated load. Because the shelves are fixed, there is no risk of accidental tipping or shifting during use, and the open design allows air to circulate freely around stored items, helping to maintain food safety and hygiene. The frame and shelves are constructed from stainless steel, a material chosen for its resistance to corrosion, heat and repeated cleaning with aggressive detergents. The surfaces are smooth and free of crevices, so food debris, grease and moisture cannot accumulate, reducing the risk of bacterial growth and making daily cleaning straightforward. The brackets and fixing hardware are also stainless steel, ensuring the entire assembly remains stable and rust-free over years of use in humid kitchen environments. The system is controlled by the physical placement of items on the shelves; there are no electrical or programmable elements. The load capacity of 50 kg per shelf dictates the maximum weight of stored goods, allowing the operator to plan storage density without risking structural failure. The overall dimensions of 1700 mm in length, 400 mm in depth and 600 mm in height define the footprint on the wall and the space required above and below the shelves for safe access and clearance from other equipment. Cleaning involves wiping the shelves and brackets with a damp cloth and a mild detergent, then drying them to prevent water spots. The absence of moving parts or electrical components means there is no routine maintenance beyond checking that the wall fixings remain tight and that the shelves are not overloaded. The LSX2-170/40/60 is one configuration of the LSX modular wall shelving system. Other lengths and depths are available, and the system can be manufactured to individual project drawings for precise integration with existing kitchen layouts. Novameta also offers full project development, from initial planning and design through to installation, ensuring the shelving matches the specific workflow and spatial constraints of the site.