Novameta LSX2-180/40/60 Wall Shelf System with Two Shelves

A wall-mounted storage system creates two fixed shelves above the worktop without occupying floor space. The shelves are held by three vertical brackets secured to the wall, distributing the weight evenly across the mounting points. This arrangement keeps the shelves level and stable, even when fully loaded, and allows unobstructed access to the items stored on both tiers.

The system is built for environments where hygiene and durability matter. Stainless steel surfaces resist moisture, heat and frequent cleaning agents, so they stay smooth and easy to sanitise. The open design prevents dust and debris from collecting, and the absence of sharp corners or crevices simplifies daily wipe-downs.

To install, the three brackets are first fixed to the wall at the required height and spacing. The shelves are then placed onto the brackets and secured with the supplied fasteners. Once mounted, each shelf can hold up to 50 kg of evenly distributed load, making it suitable for heavy pots, trays or bulk ingredients. The 1800 mm length spans a typical work zone, while the 400 mm depth keeps items within easy reach without overhanging the work surface below.

The 600 mm overall height between the floor and the top shelf leaves clearance for a standard worktop or equipment below. Because the system is modular, additional shelves or brackets can be added later if storage needs change, and custom lengths and depths are available for non-standard layouts.

Cleaning is limited to wiping the stainless steel surfaces with a damp cloth and mild detergent; no disassembly is required. The brackets and fasteners are also stainless steel, so they will not corrode or require replacement under normal kitchen conditions.

The LSX2-180/40/60 is one of several standard sizes in the Novameta LSX range. Other lengths and depths can be manufactured to order for specific projects.