Novameta LSX2-220/50/60 Wall Shelf System with Two Shelves

A wall-mounted storage system creates two horizontal work surfaces above a worktop or counter, freeing floor space while keeping tools, ingredients and utensils within arm's reach. The shelves are fixed to the wall with brackets that transfer the weight directly to the masonry, so the unit stays rigid even under full load. Because the shelves are open and unenclosed, air circulates freely around stored items, reducing condensation and making the surfaces easier to clean.

The operator loads each shelf from the front, placing heavier items closer to the wall and lighter ones towards the edge. The three-bracket support distributes the weight evenly, preventing sag and allowing the full 50 kg capacity to be used safely. Items can be accessed without bending or reaching over other equipment, which speeds up workflow in busy kitchens.

The frame and shelves are made of stainless steel, a material that resists corrosion from moisture, steam and cleaning chemicals. The smooth, non-porous surface meets food-hygiene standards and can be wiped down quickly between shifts. All fasteners are also stainless steel, so there are no dissimilar metals that could corrode or discolour.

The system is controlled by the spacing of the brackets and the position of the shelves; no electrical or mechanical adjustments are required. The shelves sit directly on the brackets, so the height of each level is set during installation and remains fixed.

A 2200 mm length spans the width of a standard worktop, providing continuous storage across the full run. The 500 mm depth matches the reach of an average adult, so items at the back are still accessible without stretching. The 600 mm overall height places the second shelf at a comfortable eye level, allowing the operator to see and reach everything without climbing. A 50 kg load rating per shelf means the unit can hold bulk ingredients, heavy pots or stacked trays without risk of deformation.

Cleaning involves wiping the shelves and brackets with a damp cloth and a mild detergent; no disassembly is needed. The open construction prevents dirt from accumulating in corners or crevices, so maintenance is straightforward and quick.

The LSX2-220/50/60 is one configuration of the LSX modular system. Other lengths, depths and shelf counts are available, and custom dimensions can be manufactured to match specific kitchen layouts or project requirements.