Novameta LSX2-240/50/60 Wall Shelf System with Two Shelves

A wall-mounted storage system creates two horizontal work surfaces without occupying floor space, letting staff reach ingredients, utensils or small appliances at standing height. The LSX2-240/50/60 unit fixes directly to the wall with three brackets, transferring the weight of stored items into the building structure rather than the floor. This arrangement keeps the area beneath the shelves free for trolleys, bins or foot traffic, a critical advantage in busy kitchens and production rooms where every metre of floor must remain unobstructed. Each shelf is a flat, rigid tray that supports up to 50 kg evenly distributed. The two-tier layout doubles the available storage while keeping the upper shelf within easy reach; nothing is placed so high that a step stool is needed. The 2400 mm length spans the width of a typical worktop or prep island, so the shelves align with existing counters and equipment, creating a continuous work surface. The 500 mm depth matches standard worktop depths, allowing the shelves to sit directly above counters without overhanging into walkways. The operator loads items onto the shelves by hand, starting with heavier or less frequently used goods on the lower level and lighter or daily essentials on the upper one. Nothing needs to be set, started or adjusted; the system is passive and ready for immediate use. The three brackets are spaced to prevent sagging, so the shelves remain level even under full load. The 600 mm overall height leaves enough clearance between the two shelves for tall containers such as stock pots or ingredient bins. The entire structure is made of stainless steel, including the shelves, brackets and all fasteners. Stainless steel does not corrode, discolour or absorb odours, so it withstands the moisture, heat and frequent cleaning of a professional kitchen. The smooth, non-porous surfaces can be wiped down with standard kitchen sanitisers without damage or staining, meeting food-safety regulations. No coatings or treatments are needed, so the material remains stable over years of use. The system is fixed to the wall with screws or bolts appropriate for the substrate; the entry does not specify a fixing method, so the installer selects anchors suited to the wall material. Once mounted, the shelves require no further adjustment or maintenance beyond routine cleaning. The 50 kg load rating applies to each shelf individually, not to the system as a whole, so both shelves can be fully loaded at the same time. The 2400 mm length and 500 mm depth create a footprint that fits above standard worktops and under typical overhead cabinets. The 600 mm overall height allows the unit to be mounted at a comfortable working height without interfering with ceiling lights or extractor hoods. The three-bracket design distributes the load evenly, so the unit remains stable even when items are placed unevenly on the shelves. Cleaning is limited to wiping the stainless steel surfaces with a damp cloth and a mild detergent. The stainless steel brackets and shelves remain rigid under full load without hinges or slides that could trap food debris or require maintenance. The shelves can be removed for deep cleaning if necessary, but the entry does not specify a removal method, so this is done according to the manufacturer's instructions. The LSX2-240/50/60 is one variant of the LSX modular wall shelving system. Other lengths, depths and shelf counts are available, and the manufacturer offers custom fabrication to match specific room layouts or workflow requirements. The system is categorised under wall-mounted storage solutions in the professional catering equipment catalogue.